priyanka1122 - PowerPoint PPT Presentation

About This Presentation
Title:

priyanka1122

Description:

A very basic word to word meaning is a device used to heat the air before further use is called as Air Preheater. They are also recognized as air heaters or air-heating pipe. It is designed to exchange heat energy with desuperheaters. Desuperheater is a Device which is been used to reduce the temperature of the steam in a high heat generation plants where large amount of heat energy or steam is released in the atmosphere. – PowerPoint PPT presentation

Number of Views:7
Slides: 14
Provided by: priyanka1122
Category:
Tags:

less

Transcript and Presenter's Notes

Title: priyanka1122


1
Types of air preheaters and its advantages?
2
Index
  • What is Air preheater
  • Types of air preheaters
  • Regenerative or Tubular type
  • What do you mean? Regenerating or feeding, giving
    water
  • Advantages of Air Preheater

3
Air Preheater
4
What is air preheater
  • An air preheater (APH) is a General term to
    describe any device, the air before another
    process is heated (e.g., combustion in a boiler)
    with the main objective to improve the thermal
    efficiency of the process.

5
  • Air pre-heating can increase boiler efficiency
    and reduce chimney loss. They can be used alone
    or replace a heat recovery system or replace the
    Steam coil.
  • An air preheater (APH) is a device used in steam
    boilers to transfer heat from the flue gases to
    the combustion air before it enters the oven.
  • Air preheater recovers the heat from the boiler
    flue gas and increases the thermal efficiency of
    the boiler .
  • The flue gases are fed into the combustion gas
    stack at a lower temperature to control the
    temperature of the gases.

6
  • The combustion air preheaters are used in large
    boilers in thermal power plants to generate
    electricity from such fossil fuels, biomass or
    waste.
  • The purpose of the air preheater heat recovered
    from boiler flue gases that increase the boiler
    thermal efficiency by reducing the useful heat
    lost in flue gases.
  • As a result, the flue gas is also sent to the
    stack flue gas(or chimney) at lower temperatures,
    making simplified construction of duct and
    exhaust stack.
  • It also allows control over the temperature of
    the gas leaving the stack (to meet emissions
    regulations, for example,)

7
Types of air preheaters
  • There are two basic types Of air preheaters
  • Rec recuperative or tubular typert

8
1. Regenerative or Tubular type
  • Recuperative type of air Preheaters is preferably
    used in small and medium boilers. In this type,
    the heat energy exchange is carried out through
    the walls of the heating surface, which separate
    the heat energy carrier and the air to be heated.
  • The ambient air is pressed by a fan through the
    conduit at one end of the preheater tube and at
    the other end, the heated air from the interior
    of the tubes into another set of conductive tube
    Preheaters out of straight bundles of tubes
    passing through the exit line of the boiler and
    open at each end outside the conduit.

9
  • The hot furnace gases go around the preheater
    pipes inside the pipe, which transfers that it
    carries into the furnace of a boiler for
    combustion.
  • http//www.maniks.com/manufacturer/air-preheater/

10
2. What do you mean? Regenerating or feeding,
giving water
  • In feed water preheaters, the exchange of heat
    energy is effected by alternating heating and
    cooling of metallic or ceramic nozzles of the
    solid or rotating heating surfaces. Regenerative
    air Preheaters are compact and can have a
    stationary Rotary hood.
  • Combined use of recuperative and regenerative
    type
  • The applications of very high capacity boilers
    used a combination of tubular and regenerative
    type of air preheater.

11
  • For such applications, the primary air heating is
    carried out by tubular type and the secondary air
    heating is carried out by regenerative type.
  • If the boiler designers do not want to use the
    combination of recuperative and regenerative air
    preheater, they can go for the tri-sector
    regenerative air heater.

12
Advantages of Air Preheater
  • For heating the air it uses heat energy of flue
    gases hence there are many more advantages of Air
    preheaters over the normal preheaters such as
  • Increases thermal efficiency of the system
  • Payback period is very short and increase
    combustion rate
  • Improve and strengthen the combustion
  • Reduces the loss of furnace and the exhaust gas
    temperature, improve the boiler thermal
    efficiency.

13
  • Air preheater is suitable for all standard fuels
  • They are easy for retrofit into existing systems
  • These air preheaters are suitable for all waste
    heat boiler / flue gas boiler / boiler types.
  • They strengthen the heat transfer
  •  
  • Visit us
  • http//www.maniks.com
Write a Comment
User Comments (0)
About PowerShow.com