Steps to Cut Your Artificial Turf - PowerPoint PPT Presentation

About This Presentation
Title:

Steps to Cut Your Artificial Turf

Description:

Don’t get confused by the term ‘cut’. The blog doesn’t talk about pruning the artificial turf; you are not required to do it, of course! For More Info Visit Our Site:- – PowerPoint PPT presentation

Number of Views:33

less

Transcript and Presenter's Notes

Title: Steps to Cut Your Artificial Turf


1
  • Steps to Cut Your Artificial Turf

Australian Lawn Wholesalers - Premium artificial
grass direct from the wholesaler save!
Manufactured for the Australian Climate, Industry
Leading products
2
  • Dont get confused by the term cut. The blog
    doesnt talk about pruning the artificial turf
    you are not required to do it, of course!
  • Here it means how to put the ideal cuts when you
    install the artificial turf in Adelaide. The cuts
    in an artificial lawn must have the proper shape.

3
  • What is the best way to cut the turf?
  • The common error people do while installing the
    artificial turf is they think that the ideal way
    is to install the lawn first and then cut
    whatever is extra.
  • However, it is a totally wrong approach. The
    right way is to measure the surface correctly on
    which the lawn is to be placed.

4
  • A uniform area with well-defined measures would
    result in a flawless installation.
  • The measures need to be close to the highest
    degree of accuracy. Dont overlook the
    proportions either.
  • Once you know the measurements, it will be easy
    to cut and install the grass.

5
  • When you go to purchase the turf, you should
    calculate the area in square meters and buy a
    little more than the requirement.
  • Dont forget the holes. You are not supposed to
    cut the turf at the ends only, but there are some
    holes as well.
  • Take a drain hole, for example. You need to make
    a hole on the turf to drain the rainwater.

6
Cutting the turf
  • Cut the turf by pieces to carry out the
    installation process.
  • It has to be done with a lot of patience and not
    in a hurry. Carelessness will result in a lot of
    wastage.
  • Make markings on the backside of the lawn and not
    on the surface.

7
  • Use trimming shears or a sharp pair of clippers
    to cut into the turf. Lay out a grid in the area
    where you want to install the turf.
  • The grid squares need to be large but not
    unmanageable.
  • Cut the turf along with the grids. It is not a
    difficult task.

8
  • When you work in small areas, it is easier to
    have accurate measurement and cutting.
  • Follow a methodical approach to prevent unsightly
    and unnecessary adjustments.
  • A perfect turf with no wrinkles or bubbles mimics
    the natural lawn. The perfection of it depends on
    how nicely you cut it.

9
Contact us Visit Our Website-
http//www.australianlawnwholesalers.com.au/
Mobile no- 0870016465 Address- Suite 4/11
Ridley Street, Hindmarsh, SA 5007
Write a Comment
User Comments (0)
About PowerShow.com