Cummins Push Rods | Call - 512-355-9101 | hamiltoncams.com

1
Cummins Push Rods
Visit Our Website www.hamiltoncams.com
2
INDEX
Cummins 12 Valve 03
Cummins Cams 04
Cummins Push Rods 05
PHOTO GALLERY 06
Cummins 24 Valve 07
Our Services 08
Cummins Cams 09
Cummins 12 Valve 10
3
Cummins 12 Valve
Welcome, and thank you for considering us for
your performance diesel needs. There are quite
a few changes for 2014. First we are offering
free shipping on all web orders over 50. 
Visit Our Website www.hamiltoncams.com
4
Cummins Cams

• Whats included
• 178/208 Camshaft (fits 89-2018 Cummins)
• Heavy duty pushrods (500-750 hp)
• 165 Valve Springs
• Retainers and Locks
• Lifters/tappets

Visit Our Website www.hamiltoncams.com
5
Cummins Push Rods
As cylinder pressures, springs pressure and rpm
increase, the stress on your factory pushrods
increases far beyond the level of stress your
factory pushrods were designed for. If you are
above 500hp with your 6bt you need to upgrade to
the heavy duty pushrods. If you are over 750hp,
the stresses in your engine dictate that you go
with our extreme duty pushrods. 
Visit Our Website www.hamiltoncams.com
6
PHOTO GALLERY
7
Cummins 24 Valve

• 6.7 Block 
• Factory replacement
• Machined for 14mm head and main bolt hardware
• 20 Stronger casting, high alloy
• 7 Cam bearings installed
• This is a non bored block, so you are able to set
  it up for a 5.9L or 6.7L Bore.

Visit Our Website www.hamiltoncams.com
8
Our Services
Also, we have added nine new profiles to improve
airflow for your specific application, whether
you are towing 30,000lbs in the mountains, drag
racing or sled pulling. For all out competition
engines check out our new three pattern cams with
different profiles on cylinders one and six to
fix the flow imbalance they have. 
Visit Our Website www.hamiltoncams.com
9
Cummins Cams
With over 20 different Cummins cams in stock, and
ready to ship, and many other competition grinds
not listed, we have the widest selection of cams
to meet your specific needs from 1,500-6500RPM!
Feel free to call us if you have any questions
about specifications, pricing and availability on
any of our products. For international orders,
please call the office.
Visit Our Website www.hamiltoncams.com
10
Portfolio
11
Cummins 24 Valve
For comparison, our 103lb springs have 102-104lb
seat pressure and 180lb nose pressure with the
188-220. By running anything other than our
103lb 24v springs with our cam, you nullify the
warranty we offer. If you run a cam with more
than .
Visit Our Website www.hamiltoncams.com
12
Cummins Push Rods
Diesels are fun to play with, they are also
dangerous. Keep this in mind when you have your
hand in front of an open turbo of a running
truck. If it gets cut off it is YOUR fault, not
the person who designed the turbo without an
idiot guard. We work hard to make our products
as safe as we can, as they are no more dangerous
than most any part out there today. 
Visit Our Website www.hamiltoncams.com
13
Cummins Cams
If you run out of oil and gall your cam, accept
the consequences. If your cylinder head has many
cracks from overheating, it is not our fault. If
you tighten your 14mm head studs to the point you
collapse part of the casting, put your big boy
pants and accept the consequences.
Visit Our Website www.hamiltoncams.com
14
Cummins Push Rods
We do not offer refunds unless our part has a
defect in workmanship or materials. This is not
a Womens clothing store. If you are not sure
about a part, please call us before ordering. We
try to keep our prices as low as we can.   This
means that we do not add in the additional cost
of returns, refunds, etc., so that we can sell
you a cam at a reasonable cost.
Visit Our Website www.hamiltoncams.com
15
Cummins 12 Valve

• Cummins 12 Valve

Visit Our Website www.hamiltoncams.com