Brick slips installation steps

1
Brick Slips Installation Steps
2
Who doesn't want their home to look beautiful
right? Not only interiior but also exterior which
is so important to make it an all round affair.
The reason why when building our house we neglect
the very practical and affordable path as a lot
of things come into consideration as we also need
to build the house keeping natural calamities in
mind too right? The reason why hiring a proven
brick slips installation company is of utmost
importance!
3
Step 1 Adding the Panel
Adding the panel basically involves putting a
sheet that will be utilised to grasp the slips
and also to support the wall surafce. This step
is very critical and that is why it is imperative
to choose it wisely. We usually recommend while
installing to go with either Jabalite or
Kay-Meltzer insulation panels.
4
Step 2 Fill the breaks between the boards
A simple rule one must follow is to fix the
parallel datum used to level the boards. Now, the
datum that you choose can either be the door or
windows head, for instance. Once the prior board
has been done with the installation then
everything must come together. If you notice any
breaks between the boards then they can be filled
with some cement or some sealing tape which is
water resistant.
5
Step 3 Adding the Brick Slips
Now when the boards in a right place, now is the
perfect time to install the brick slips. Make
sure that the surface is dry and before
installing. The slips are set in such a way that
the temperature must not affect it, but if there
is low temperature and high moisture then this
can shake the bond time. Also, after the
installation process is done make sure that you
clean the surface, tto use clean water and or use
some brick cleaner.
6
Contact Us
Call 01702 233003 email info_at_jandatiling.co.uk w
ebsite https//jandatiling.co.uk/