Consider Getting PCBs From The Leading Manufacturer

1
Consider Getting PCBs From The Leading
Manufacturer
2
Circuit boards are sheets of insulating material
used for the mounting and interconnection of
components in electronic gadgets. In other words,
it can be said that it is an insulated board or
panel on which interconnected circuits and other
components are printed
3
The advent of PCBs
Till the time when printed circuit boards or
printed wiring boards came into being, circuits
were constructed through a laborious process of
point-to-point wiring. This resulted in frequent
failures at wire junctions and short circuits due
to aging and cracking of wire insulation. The
size and cost of electronic components began to
decrease, when electronic moved from vacuum tubes
and relays to silicon and integrated circuits.
4
There was a pressure to reduce the size and
manufacturing costs of electronic products which
drove the manufacturers to look for better
solutions leading to the advent of PCBs. One of
the common terms related to PCBs is Circuit board
fingers which refer to the exposed metal pads
along the edge of a board. The fingers are used
to create a connection between two wire boards.
5
The PCB makers
The heavy copper PCBs from the leading PCB
manufacturer called GreatPCB SMT Limited are wire
boards that are printed and consist of Circuit
board fingers with more than 3 ounces of copper.
They understand and pay attention to the
relevance of thermal management because
electronic are used in the most demanding
environments and operate at highest currents.
6

• That is why they manufacture heavy copper PCBs
  that help in the conduction of heat away from the
  components so that the chances of failure are
  reduced. Keep reading to know about the
  advantages of of using their PCBs.

7
Less wires and compact size

• Their printed wire boards offer a simple platform
  which enables to arrange the electronic
  components in a compressed and efficient way. It
  provides compactness when creating big and
  complicated electronic circuits in small form
  factors which in turn occupies less space in
  devices.

8
Easy to repair and install

• Since the electronic components and their
  polarities are clearly labeled on their board, in
  case of any damage it is easy to check and
  replace the particular failure components. This
  also allows convenience during the installation
  and repair process.

9
Saves time

• As compared to the conventional method of wire
  connections, their printed wire boards takes much
  less time in assembling a wire.
• Circuits remain in place
• All the components on their PCB are held fixed to
  the boards by solder flux which does not allow
  them to move irrespective of the movement of the
  boards.

10
Less electronic noise

• The components in a PCB are laid properly and the
  electrical components are organized in such a
  manner that the path lengths of the electrical
  current between the components are less. This
  gives PCBs less electronic noise.

Less chance of short circuit
The chances of short circuits or loose
connections are less as the connections are made
automatically through copper tracks
11
Affordable

• As PCBs are manufactured on a large scale, it is
  affordable.

Consider getting PCBs
Consider getting PCBs from the leading
manufacturer, as it is a very important part of
modern electronic gadgets and it is a perfect
choice for the manufacturers of electronic
components, instruments and equipments.
12
Contact Us . . .
Address 22, Science Park, The Northern part of
HeYi Village, ShaJing Town, Bao An, Shenzhen,
GuangDong, China, 518104 Phone [phone]
Fax [phone] Email sales_at_greatpcb.com W
hatsApp 86-13682523810 Skype GREATPCB Website
http//www.greatpcb.com
13
Thank you