Prevent Slab Leaks to Prevent expenses (1) - PowerPoint PPT Presentation

About This Presentation
Title:

Prevent Slab Leaks to Prevent expenses (1)

Description:

Slab leaks are one of the most annoying plumbing issue. We get dripping water on your head wherever we go in the house. That causes annoyance. However if slab leakage is avoided it can put a big hole in your pocket. – PowerPoint PPT presentation

Number of Views:7
Slides: 11
Provided by: mauricemadsen799
Category:

less

Transcript and Presenter's Notes

Title: Prevent Slab Leaks to Prevent expenses (1)


1
Prevent Slab Leaks to Prevent expenses
http//www.a-general.com
2
No matter what the plumbing issue is, it severely
needs to be considered. Leaking slabs are one of
them. If slab leakages are remained unidentified
for the longer period of time, the homeowner will
end up paying thousands of dollars, half of it
would be for getting rid of the leakage and half
of it would be for paying residential plumbing
services. Like we always say prevention is better
that cure. Lets try and prevent some easy tips
that can prevent this slab leak. Leaks dont
just occur at home, but many commercial houses
also face the same issue. This leak occurs in a
location of the area that are often foundation
and often hidden. These slabs leaks are generally
hidden, it can continue leaking secrets, and the
property owner wont even recognize that there is
a problem in the slab and it is leaking.
Ultimately, we end up having lots of damage to
the house as well. There are some proactive steps
that can be taken to prevent the slab leakages.
http//www.a-general.com
3

http//www.a-general.com
4
Check PH level of your water- Too low or too
high level of waters PH level can have adverse
effects on pipelines. Its amount of percentage
determines if the water is too hard or soft. Both
hard and soft water is not good for copper pipes
and creates a corrosive environment for them.
There are 24 Hour Plumbers Professionals near
Long Branch who can help you get to know about
the current level of PH in your water.
http//www.a-general.com
5

Water pressure- Make sure that the water
pressure is correct. If water is travelling too
fast through pipes, that is more than seven feet
per second, will cause corrosion of the pipe as
it travels. After a period of time the coating of
the pipe would wear down in certain spots and
holes begin to form and causes leaks.
http//www.a-general.com
6

http//www.a-general.com
7
On the other hand, even the slow water is
dangerous for the pipeline. As the water heats
up. Some minerals separates from the water. They
get mixed up with the calcium and tend to get
heavy and can stick to the bottom of the pipe if
the water is not moving through the pipe fast
through. If the minerals and calcium collect on
the bottom causes corrosion and creates holes in
the pipes.
http//www.a-general.com
8

Check Household Chemicals- You generally tend
to use chemicals to unclog the drain, but we
generally dont realize that they are not healthy
for our pipes. It does remove the clog, but it
also adversely affects the copper pipes. The same
chemical that attacks the slug also attacks the
pipes and creates holes and leaks.
www.ageneralsewerservice.com
9
Last but not the least, observe the differences
in your water bill. Your water bill must be
consistent over a period of years and sudden
change in it, indicates the problem. You can
contact local plumbers immediately to search for
the reason of water bill change. With proper care
and maintenance, you can be saved from the
nightmare of slab leakage.
http//www.a-general.com
10
A-General Plumbing Sewer 129 Adelphia
Rd. Farmingdale, NJ 07727 Phone No. - 732-919-7000
http//www.a-general.com
Write a Comment
User Comments (0)
About PowerShow.com