Common Paint Problems Solutions - You should know!

1
Common Paint Problems Solutions - You should know!
2
Working with reputed painting companies can help
you accomplish all your residential and
commercial painting needs. Whether you plan to
paint the interior part of the house or the
exterior ones, you can do that right now. But,
there are some common paint problems which
reliable to local painters from Melbourne and it
might help you understand before they even start
working on your project. It is just to remain on
the safer side. Dont worry about the problems as
they have solutions to it as well.
The first issue is with blistering paint
Blistering paint, as identified by local painters
from Melbourne, is smaller to medium sized
blisters or bubbles just under the paint film and
it is most common on wood trim and siding. The
potential causes are many. Painting under direct
sunlight on hot substrate can cause blisters. It
can trap solvent vapour as paint tries way too
quickly. Moreover, painting when wood is damp or
even rain, dew or high humidity just after the
latex paint are some of the other reasons behind
blistering formations. As a solution, the
painters at Melbourne south east will scrape away
blistered paint and sand to the bare wood. They
will let the wood dry completely and then sand,
prime and even paint in non-direct sunlight and
non-humid conditions. They have to use high
quality latex paints.
3
Alligatoring and checking next issue
Alligatoring is mainly failure in the paint film,
where it might take some time on cracking pattern
of the deep relief resembling that of a reptile
skin like alligator. On the other hand, you have
checking, which is a similar form of failure but
less severe. It is mostly characterized by fairly
long spaced cracks in paint film having shallow
depth of relief. You need help from painters at
Melbourne south east to treat these issues
now. The fix is same for alligatoring and
checking. You just have to remove old paint. Then
sand, prime and repair the area with flexible
latex depending on the paint. Always remember to
use premium quality latex paint for this service.
4
Efflorescence know more about it
An issue with painted masonry construction is
that efflorescence can take place. It is
identified by crusty deposition of white salt
that might bubble through paint film from masonry
structure. Salts in concrete or brick become
dissolved with water and then will leach to
surface as the water starts to evaporate. Get
help from commercial painting company for the
solutions. If the moisture is getting into
masonry wall, then you have to eliminate source
of moisture by tuck-pointing cracks or missing
mortar in wall. In case the moisture is migrating
from outside, then you have to apply
waterproofing to outside of wall. You need to
remove all loose flaking and efflorescence with
wire brush before repainting.
5
Other than these issues, you have chalking,
mildew, sagging or running, and rust
discolouration as some of the other painting
issues. Always remember to contact experts from
commercial painting company for immediate help in
this regard for sure.
For More Information Visit us
www.allpropaintsystems.com.au