Way to Flush the Radiator of your Car

1
Way to Flush the Radiator of your Car
Way to Flush the Radiator of your Car
2
The radiator is a component of your car which is
basically used to take the heat out of the
coolant and place them into the air in which the
fan blows in.
3
Then the coolant liquid will be circulated back
into the engine of your car to cool down the heat
components of the engine.
4
When the coolant of the cooling system is going
to build up with dust and debris, then to get rid
of the sediment the coolant flush on the car
radiator.
5
The below steps helps you to flush the radiator
of your car easily and smoothly.
6
The proper time to flush
7
Generally the radiator of your car supposed to
flush in every 5 years or 100,000 miles. Sometime
it will depend on the driving habits of the car.
8
Your auto mechanic will always recommend you to
flush the coolant on every 30,000 miles for
increasing the engine performance.
9
Drain the coolant
10
To flush the radiator, first you need to drain
the old coolant from your car and drive them for
at least 30 minutes prior to start the process of
engine cooling.
11
To catch all the old coolant from the radiator,
first you need to place a special pan under the
radiator.
12
Add cleaner second
13
Once you will successfully drain the old coolant
from the radiator, then add special radiator
cleaner to the reservoir of the radiator.
14
After placing the cleaner in the radiator, add
distilled water to the reservoir and turn on your
car and set your heater to full to clean the
cooling system.
15
Drain them again
16
When you clean process is finished, then you need
to drain the cleaning fluids and distilled water
from the radiator.
17
Again perform the similar cleaning process and
flush the cooling system with the tap water to
ensure that it will clean all the sediments.
18
Add new coolant
19
At last, add the new coolant to the radiator
reservoir of your car. So, you need to add a half
gallon of antifreeze and a half gallon of
distilled water.
20
Check your owner's manual to get the exact
amount of these things. Then start your car and
let the coolant run through the engine for 15
minutes.
21
Conclusion
22
If you don't have enough time to handle the
flush process by yourself, then you can take your
car to a reputed mechanic.
23
Inspect your car by a reputed mechanic, they
will suggest you the right time of radiator
flush.
24
https//beemerpros.com/
THANK YOU!
https//www.facebook.com/Bavarian-Performance-Spec
ialists-160107354009662/