How to Fix Error Code 0x97 in HP Printer?

1
How to Fix Error Code 0x97 in HP Printer?
2
HP Printers hold a high ground in the field of
printing technology. They produce a high-quality
output and their performance is world known. HP
is typically famous for its advanced technology
and features along with being easy on the pocket.
It surely has enhanced the printing experience.
However, some errors may arise due to printers
fault or by malware in your system. It can cause
several errors, one of which is error 0x97, which
shows up on your screen, hardware or even
software. To resolve this issue effectively,
proceed below.
3
Method 1 Reset printer

1. Remove all attachments from the printer.
2. Now press on the power button for at least 5
   minutes.
3. Plug the power cord and switch the printer on.
4. Now check if the issue is resolved or not.

Method 2 Fix paper jam

1. Cancel the given commands for printing and switch
   of the printer.
2. Unplug all the links and cables from it.
3. Open the cover of the printer to remove the paper
   pieces jammed in it.
4. Clean the cartridges by removing them.
5. Place them back inside carefully once, they are
   clean.
6. Press the power button for 5 minutes.
7. Reconnect all the power sources and plugs.
8. You are done.

4
Method 3 clean the nozzles

1. Unplug power sources and turn off the printer.
2. Remove the cover of the printer and place a paper
   right below the nozzle.
3. You have to remove the cartilages and leave the
   nozzle for minimum 12 hours so that it can soak
   the remaining ink.
4. Now install the cartilages back again and restart
   your computer by connecting all cords and links.

You can also connect with HP Printer Technical
Support Canada 1-778-806-1736 to receive the
unparalleled advice and solutions from the
professionals.
5
Thank You!

• Any Query?
• Call _at_ 1-778-806-1736
• You can find us at
• https//hp.printersupportnumbercanada.ca/