Few basic tips for Laminate Wood Flooring - PowerPoint PPT Presentation

About This Presentation
Title:

Few basic tips for Laminate Wood Flooring

Description:

High-Pressure Laminate Sheet is using in laminate Wood flooring because of its durability and it has full protection from all element of weather conditions. – PowerPoint PPT presentation

Number of Views:49

less

Transcript and Presenter's Notes

Title: Few basic tips for Laminate Wood Flooring


1
Few basic tips for Laminate Wood Flooring
2
Laminate Wood Flooring
3
  • We have different types of laminate sheets are
    available in the market depends upon our
    requirements have to choose right branded
    laminate sheet for your interior designing,
    mainly high pressure laminate sheet having more
    flexibility for interior designing

4
  • it will perfectly apt for all kinds of interior
    designing. High Pressure Laminate Sheet is using
    in laminate Wood flooring because of its
    durability and it have full protection from the
    all element of weather conditions..

5
  • Prepare for the floor for installation
  • We have to unwrap the packages of floor planks
    and them stack up on the floor. The planks should
    need 48 hours to acclimate the temperature and
    humidity of the room before youre going to
    install wood flooring for your home. Clean the
    entire floor thoroughly by using a vacuum cleaner
    to remove all dust and moisture to get good
    perfect flooring for your home.

6
  • Trim the door jambs
  • If you have door jambs, that flooring will not
    cleanly side beneath, you have to trim them
    before the flooring. Lay a piece of flooring
    against jamb, mark with pencil. Use a perfect
    cutter to cut the properly parallel to the floor.
    You have to bring a copy saw from High Pressure
    Laminate Sheet Manufacturers to cut perfectly
    your laminated planks.

7
  • Install a first row
  • Place 1/2- inch spacers against the wall within
    every 12- 18 inches. This will allows space for
    expansion and give more contraction and it will
    keep the floor from wrapping mainly. The wood
    planks should be laid so theyre parallel to the
    wall.

8
  • Cut the planks to be fit
  • You have to cut the planks proper size for your
    wood flooring, a lay on the top of the last, with
    the ends flush. Lay another plank on the top of
    the second row properly slide this top plank
    firmly against the spacer along the wall.
  • Replace dash base boards
  • You have to remove the spacers along the walls,
    and replace the Green Building Materials,
    attaching them to the wall for finishing nails.
    It will create a finite look to your flooring.
  •  
Write a Comment
User Comments (0)
About PowerShow.com