Most Effective Methods to Tighten the Battery Terminal

1
Most Effective Methods to
TIGHTEN THE BATTERY TERMINAL
2
The battery of your car is the most important and
essential part of your car's operating system.
3
When the battery is worn out or fallen, it
doesn't always mean that the battery itself is
going to be dead.
4
Sometimes the cables or the terminals of your
battery can be loose, so the charge unable to
reach the desired place.
5
So, to continue the flow of the charge in your
car, you need to tighten the leads of your car
battery.
6
Here the given points help you to tighten your
car battery without having any difficulties.

• Check the coverage
• Clean the battery terminal
• Tighten the battery terminals

7
Check the coverage
8
Checking the battery is the simplest solution for
maintaining your car. So open the hood to look at
the battery cables and the correct terminals.
9
If you find that the connectors moved or placed
incorrectly, the battery will not work the way it
should be and damage the components.
10
The cable attached to the leads of the battery
must be insulated to prevent the possibilities of
electric shock.
11
The rust wires can disperse the energy created by
the battery and weaker the connection. So, you
need to cover it with electrical tape or replace
them.
12
Clean the battery terminal
13
If you notice that the battery of your car is
connected properly, then the terminals can be
dirty for producing the charge.
14
For cleaning the battery terminals, you can apply
the cleanser on the terminals as well as the
clamps.
15
You can use the cleanser for cleaning your
battery as much as you think because it will not
hurt the terminals or anything around them.
16
You can also use the wire brush for cleaning few
parts of your car and wipe it with a clean towel
to clean the battery completely.
17
Tighten the battery terminals
18
For tightening the battery terminal, you need a
socket wrench to turn the bolts available on the
clamps in a counter-clockwise to open them.
19
Then place each of the clamps over each of the
terminals on the car battery.
20
Make sure that the negative clamps on the
negative terminals, and the positive clamps over
the positive terminals.
21
Once you will put them in their places, tighten
them again with the ratchet and turn it clockwise
until it is tightening.
22
Conclusion
23
If you want to replace and tighten the car
battery or cleaning other parts of the engine,
you first need to disconnect the battery.
24
The connected battery may be losing other
components of your car, that should be also lost
during the normal uses.
25
However, by following the above defines methods
the battery terminals are very easy to tighten
regardless of the situation.
26
https//www.greengaragewp.com/
https//www.facebook.com/407gogreen/
THANK YOU!