Process of CCTV Camera Installation Setup

1
Process of CCTV Camera Installation Setup

• From
• www.vrscomputers.com

2
CCTV Camera Installation

• The CCTV camera Installation setup has been the
  most critical entity for companies and residences
  in order to monitoring the untoward and illicit
  activities which keeps happening around.
• In this process, the CCTV cabling and its
  subsequent alignment have made it possible for a
  good surveillance system possible as these CCTV
  Camera have proven to be an instrumental tool to
  determine the productivity and efficiency of the
  business as well.

3
Choose a High, Broad angle for your CCTV Camera

• The best angle of any room is usually looking
  down from the corner where the ceiling meets the
  walls. Make sure you can clearly see all entries
  and exits and that the camera is near a power
  outlet.
• If you are mounting a camera outside, place it
  above 10ft so that it cannot be easily knocked
  down.

4
Mount your CCTV Camera to the wall

• Some cameras come with sticky pads to adhere your
  camera to the wall, but screwing your camera in
  is the safest way to mount your cameras
  long-term. While every camera is different, most
  of them can be mounted the same way
• Place the mount in its desired location.
• Using a sharpie, make marks on the wall where
  each screw should go.
• Drill a hole for each screw using an electric
  drill
• Hammer in any molding pins.
• Screw the mount into the wall.
• Position the camera to your desired angle.

5
Attach your CCTV Camera to a Power Source

• Almost all cameras come with a power adapter that
  plugs into a normal wall socket. Plug the small,
  round end into the power input on the back of the
  camera and plug the other end into the outlet.
• If your power adapter is missing or broken,
  contact your manufacturer.

6
Attach a Wired CCTV Camera to your DVR

• Wireless cameras will come with a software disc
  that you need to install to view your feeds.
  Follow the on-screen instructions to access your
  cameras.
• Some cameras have a small receiver that attaches
  to your computer through a USB port. Make sure
  this is properly attached.
• Write down your camera's IP address (ex.
  192.168.0.5) if provided -- this number can be
  typed into any web browser to view your camera
  remotely.

7
Attach the Monitor to the DVR

• This connection frequently uses a BNC cable as
  well, but some DVR's can attach with HDMI cables
  or coaxial cables. Using your preferred
  connection, attach one end to the DVR's "Output"
  port and the other to the monitor's "Input."
• You can hook up as many cameras as your DVR has
  inputs -- it will automatically record every
  camera you install.
• Note which input you plug into-- this is the
  input you need to choose to see your cameras.

8
Troubleshoot any Connection Issues

• Check that the camera, DVR, and monitor are all
  hooked up to a power supply and turned on.
• Make sure your cables are securely attached and
  that you have selected the right inputs for your
  DVR and monitor.
• Some monitors will display every camera at the
  same time, others have "input" buttons that allow
  you to switch between cameras.

9
Conclusion

• Looking for Setup CCTV Camera Installation in
  your house, business area, etc., Contact VRS
  Technologies in Dubai, UAE.
• Contact US
• VRS Technologies LLC
• Call 971-55-5182748
• Visit www.vrscomputers.com