How To Creat A Bootable Pen Drive

1
welcome to

• How To Create a Dos Bootable USB Pen drive

2

• Creating a dos bootable USB pen drive is an easy
  task as MS-DOS isn't used that often still there
  are some cases where we need to boot a computer
  using a dos bootable USB.
• You might be having problem with BIOS or any
  other firmware or want to use low-level utilities
  in those circumstances it would be really helpful
  if you create a one for yourself.

3

• Here in this slideshow, we will be creating a
  bootable USB using a free program called as
  RUFUS. It is a free tool but extremely powerful
  and very easy to use.
• You may want to boot your computer or PC from
  this USB in case need to Reset BIOS password as
  there are many programs to crack CMOS password
  used only with dos bootable disk.

4

• Before some years ago I used to boot my computer
  using a bootable floppy but nowadays using floppy
  disk has died no personal computer or even
  laptops have a floppy disk installed in their
  cabinets.
• Therefore it made me think to create a USB FLASH
  DRIVE for myself as USB is seen commonly in about
  all the modern day computers.

5
 Creating a Dos Bootable USB

• You must have a pen drive more than 4 GB of
  capacity
• You will need a software with which we will be
  creating USB pen drive . You can download the
  free software from below given link 
• check for working USB slots available on your PC
  or laptops

6
Rufus Software

• Step 1  Double Click On Rufus.exe file
• Step 2  Connect Your Pen drive to one of the
  USB slots available
• Step 3  Select Your Pen drive In Device Option.
• Step 4  Select Free Dos.
• Step 5  Click On Start
• (Note All The Data In The Pen drive Will be
  Formatted) Kindly backup all important data from
  your pen drive as it will erase all the data
  inside.

7

• Tip  Now go to Bios setting and make necessary
  change and boot your system using this pen drive
  After creating Dos Bootable Pen drive Use can
  also copy software in pen drive by simple copy
  paste from windows

8

• Now after the USB bootable pen drive is created
  you can also copy BIOS flashing files by using
  copy paste using windows .Which can be used later
  to flash BIOS.
• You can now use this USB thumb drive as you use
  windows bootable device still if you want to
  master DOS you should be aware of some basic dos
  commands which will help you immensely and your
  comfort level will increase with some small
  amount of practice .

9
Thank you Friends

• Source
• http//www.chtips.com/bootable-pendrives/how-to-cr
  eate-a-dos-bootable-usb-pendrive
• http//www.chtips.com/bootable-pendrives/how-to-cr
  eate-a-bootable-usb-pendrive
• http//www.chtips.com/msdos/basic-dos-commands