How To Change Green Pool into Crystal Clear Water - PowerPoint PPT Presentation

About This Presentation
Title:

How To Change Green Pool into Crystal Clear Water

Description:

When it comes to reopen your swimming pool in summer, you will find that the pool water becomes green. It is a most common problem which pool owner may face. It is better for commercial pool owner to hire authentic pool management firm in order to maintain the pool. – PowerPoint PPT presentation

Number of Views:13

less

Transcript and Presenter's Notes

Title: How To Change Green Pool into Crystal Clear Water


1
How To Change Green Pool into Crystal Clear Pool
http//usamanagement.com/
2
Introduction
  • When it comes to reopen your swimming pool in
    summer, you will find that the pool water becomes
    green. It is a most common problem which pool
    owner may face. It is better for commercial pool
    owner to hire authentic pool management firm in
    order to maintain pool.

3
  • When algae starts to grow in your pool, pool
    water becomes green. So, it is important to treat
    your commercial or resort pool before summer, so
    your visitors and guests can enjoy water
    activities.
  • Apply the following steps to clear the water.

4
Check chemical level in water
  • You need to check the chlorine and pH levels of
    your swimming pool. This will help you to solve a
    range of problem. The cause of algae to grow in
    the pool is that chlorine levels drop below 1
    ppm. While using testing kit, if you find out the
    same, you need to take certain measures.

5
Maintain the Chemistry of the Pool
  • Add acid to bring the PH level up to 7.8.
    According to a certified pool operator from pool
    management group says that, this is higher than
    the normal range you want when swimming in pool.
    However, but it is enough to treat algae. For
    balancing PH level, you need to turn on your pump
    so the chemicals circulate throughout the pool.
    You need to add sodium carbonate to increase the
    pH level or decrease by using sodium bisulfate.

6
  • For balancing PH level, you need to turn on your
    pump so the chemicals circulate throughout the
    pool. You need to add sodium carbonate to
    increase the pH level or decrease by using sodium
    bisulfate.

7
Shock the pool
  • It is most important process. In this process,
    algae gets killed due to high levels of chlorine
    present inside pool water. This process sanitizes
    your swimming pool.

8
Clean the Sides surface of the Pool
  • It is important to check the surface of the pool
    before adding pool chemicals. If you find
    difficulty in seeing the bottom of your pool,
    brush the bottom of pool. Algae will cling to the
    surfaces of your pool so by brushing it you can
    clean the bottom. Use scrub to clean the sides of
    your pool.

9
Contact Us
http//usamanagement.com/
Write a Comment
User Comments (0)
About PowerShow.com