DIY-How to change your car Tire

1
Tata Spare Parts

• DIY-How to change your car Tire

www.bpautosparesindia.com/tata-spare-parts/
2
Introduction

• To tell you honestly, changing a tire is a pretty
  simple task, if you are prepared and if you know
  how to do it.
• Do you want to be able to change a tire without
  anyone's help?
• Yes, then we are ready to help you too provided
  you are willing to put in a little effort.

3
Essential Tire-changing Tools

• Spare tire
• It is Usually located under the floor mat in the
  trunk.
• SUVs or trucks may have the spare mounted
  underneath or on the back of the vehicle.
• TIP  Check your spare tire frequently and ensure
  it is properly inflated.
• Jack
• Lug wrench

4
Essential Tire-changing Tools

• Flashlight with running batteries
• Flares and reflective triangles
• Gloves.
• Leather is suitable since it works well in a
  variety of weather conditions.
• Wheel wedges
• Flat tire repair kit
• Optional, but ideal if you can't take your tire
  to a mechanic shop right away.

5
Find a safe Spot

• In case your car gets a flat tire while you are
  on road,
• Slow down, 
• Switch on your hazard lights, and 
• Find a safe place to change your tire.
• Suitable locations for changing a tire include
• A side street.
• The shoulder of an off ramp.
• A parking lot.
• A long, straight road.
• An alley

6
Remove your spare and take out the tools you
need.Position flares or reflective triangles
behind your vehicle for safety, if you are
changing your flat tire on the road.To keep
your vehicle secure while it's on Jack, place
wheel wedges against the tires opposite of the
flat.Use the flat end of the lug wrench to pull
the wheel cover or hubcap off.

• STEPS FOR CHANGING YOUR TIRE

7

• Now place your jack beneath your car and raise it
  up to connect with your car's frame.
• Stretch the jack until your tire is at least 6
  inches off the ground
• Now simply unscrew and remove the lug nuts.
• Line up the spare tire with the exposed lug nuts
  and position it in place.
• Now again put the lug nuts and tighten them.
• Once the car is back on the ground, you can
  tighten the lug nuts.

8

• Now slowly lower the jack until the tire touches
  the ground.
• Now, tighten the lug nuts with the wrench to
  secure them in place.
• Again place the hubcap or wheel cover, if you
  have one.
• At last, again check the pressure on your spare.

9

• In case you still find any difficulty with the
  process or finding reliable and high quality
  Spare parts, BP Auto Spares India is always at
  your service.

10
Head OfficeBP Impex4984-4985 Roshanara
RoadDelhi 110007, INDIAPhone - 91 11
23824308, 91-9971119928info_at_bpimpex.inwww.bpaut
osparesindia.com

• Contact Us