How to control the flow of gas and liquids? - PowerPoint PPT Presentation

About This Presentation
Title:

How to control the flow of gas and liquids?

Description:

What controls the flow of the quantity of a gas or a liquid moving in a pipe? A device called Flow Meter is used for the same purpose. – PowerPoint PPT presentation

Number of Views:92
Slides: 12
Provided by: countronicss
Tags: flow_meter

less

Transcript and Presenter's Notes

Title: How to control the flow of gas and liquids?


1
Flow Meter
2
Overflow of Gas and Liquid
  • Have you ever wondered about the flow rate of a
    gas? What controls the flow of the quantity of a
    gas or a liquid moving in a pipe? A device called
    Flow Meter is used for the same purpose. Lets
    discuss units of measurements of gas and liquid
    that can be measured by flow meters.

3
(No Transcript)
4
Gases
  • Gases are generally measured by carioles mass
    flow Meters, thermal mass flow Meters, and mass
    flow controllers. Please note that gases are
    comprehensible and they change the volume when
    under pressure.

5
Measurement Units of Gas
  • Acm/h (actual cubic meters per hour)
  • Sm3/sec (standard cubic meters per second)
  • Kscm/h (thousand standard cubic meters per hours)
  • LFM (linear feet per minute)
  • MMSCFD (million standard cubic feet per day)

6
Liquids
  • The units of measurement used in controlling the
    follow of liquid is generally categorized by
    gallons per minute, Liters per second, bushels
    per minute.
  • If the Flow Meter is used to measure the river
    flow, the measurement is considered under cusecs
    or acre-feet per day.
  • Precision Flow Meters are only used to accurately
    measure the flow control. These meters are
    generally used in industries like aerospace where
    the accuracy level required by Flow Meters ranges
    between 5 to 10.

7
Selection of Flow Meter
  • What type of gas and liquid needs a flow control?
  • Whether the application requires minimum and
    maximum flow rates and how much!
  • What is the requirement of accuracy in the
    application?
  • The temperatures and viscosity of the liquid and
    gas to be controlled
  • What is the maximum pressure at the location?
  • Whether the pressure drop is a necessary segment
    in the procedure?

8
Advantages of Flow Meter
  • Once these queries are resolved, the flow Meters
    are applied accordingly. Through the
    classification may differ, but major procedures
    in a specific industry is incomplete without Flow
    Meter operations. Since the device helps in
    controlling the flow of the gas and liquid, one
    can understand the tension and pressure that can
    create disasters if the flow is not accurate. The
    applications may differ, but the resultant
    subject is highly dependent on the Flow Meter.

9
Conclusion
  • You can consider the same applications on the
    cylinder gas flow attached to the gas stoves in
    your kitchen. The Flow Meters attached to the
    cylinder helps in controlling the flow of gas
    reaching the gas stove. So consider this device
    wisely, because many lives and procedures are
    dependent on the same.
  • Source http//bit.ly/2rGOBa3

10
Address M-95, Connaught Circus, New Delhi, 110
001 INDIA Phone No 91 11 23415674,
9810536887 Email countronindia_at_gmail.com
Website www.countronics.com
11
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com