Wrong Fuel In Car

1
Wrong Fuel Recovery

• Fuel Decanting Process

Part of the WF Recovery Group
2
(No Transcript)
3
Protective Clothing

• Protective Clothing MUST be worn at ALL times.
  This includes
• Safety Boots
• Gloves
• HI VIS Clothing
• Safety Glasses

4
Arriving At Location

• When arriving at a Depot you must turn on your
  flashing beacons as you enter the gate.
• If another van is using the Decanting Facilities
  then you should park your vehicle in a suitable
  location.
• Once the Facilities are free, maneuver your
  vehicle so that it backs up to the Decanting
  Facilities.

5
Safety On Site

• Connect the Ground Cable to the grounding point
  located on the Sites Tank.

6
Safety On Job

• If at any time there is a problem with the
  decanting procedure or a hazard arises during the
  decanting process, hit the Emergency Stop button
  to immediately stop all electrics in the rear of
  the van.
• If at any time you feel at risk or any member of
  the public or anyone on site is at risk, press
  the emergency stop button and retreat to a safe
  distance away from the vehicles and any fast
  moving traffic. CALL 0800 772 3842 IMMEDIATELY
  (if necessary, always phone 999 first) and ensure
  no one enters the working area.

7
Safety On Job

• The van is equipped with the following safety
  equipment
• A fire extinguisher
• An eye wash kit
• A first aid box
• A spill kit
• All information on the locations of these items
  can be found on PAGE 2.

8
Decanting Process

• Open cabinet A using the key.
• Press the green button on the display and wait
  until it reads ready.
• Press and hold your fob against the metal reader
  until your hear the beep.
• You now have 10 seconds to open cabinet B (if
  you do not open it in time, press the reset
  button and start again)

9
Decanting Process

• Connect the 1-inch Outlet Hose Coupling to the
  coupling in cabinet B.
• Turn on your van and activate the electrics in
  the rear.

10
Decanting Process

• Activate the Outlet Pump
• Check for leaks and stop the decanting procedure
  if a leak is detected. Use the spill kit if
  necessary (decanting may be restarted once the
  leak is fixed).

11
Decanting Process

• Check your gauge.
• Once your tank is empty, turn off the Outlet
  Pump.
• Disconnect the 1-inch Outlet Hose Coupling and
  store it back in the van.
• Close the door on cabinet B.
• Press and hold the RED button in cabinet A
  until it reads thank you
• Close the door on Cabinet A.

12
Decanting Process

• Disconnect the Ground Cable from the ground point
  and store it in the van.
• Ensure all doors on both cabinets are locked and
  secured.
• Secure your van and turn off the electrics to the
  rear.
• If you encounter any problems while decanting
  call 0800 772 3842.
• All incidents must be recorded on an Incident
  Report Form

13
Completion

• You have successfully emptied your tank.
• Remember to turn off your flashing beacons as you
  leave the site.