Ausgrid Witness Testing by BCJ Controls | Anti Islanding - PowerPoint PPT Presentation

About This Presentation
Title:

Ausgrid Witness Testing by BCJ Controls | Anti Islanding

Description:

Ausgrid witness testing is considered by Ausgrid to be ‘commissioning’ works, carried out under their standards NS194 and NS194A. For more info visit BCJ Controls @ . – PowerPoint PPT presentation

Number of Views:19

less

Transcript and Presenter's Notes

Title: Ausgrid Witness Testing by BCJ Controls | Anti Islanding


1
Ausgrid Witness Testing
  • Ausgrid Witness Testing for Commercial Solar
  • BCJ Controls Australia

2
  • Customers with installations within the Ausgrid
    service area are required to carry out witness
    testing of their installations. Checks on the
    protection relays and inverters will need to be
    carried out in situ, in conjunction with an
    Ausgrid employee on the same day. Ausgrid witness
    testing is considered by Ausgrid to be
    commissioning works, carried out under their
    standards NS194 and NS194A.
  • A Witness Tester will need to perform several
    electrical tests on the relay. These include
    over/under voltage, over/under frequency, phase
    shift, rate of change of frequency (ROCOF). These
    tests are all concerned with what happens during
    a Loss-of-Mains (LoM) event, and its potential
    impact on the network. Short-circuit protection
    (overcurrent) is not considered a part of this
    testing regimen, and should be carried out at a
    different time.

3
  • An Ausgrid person will be present, as your
    installation will be connected to the network
    during the final operational checks. They will
    want to see that the primary network protection
    operates as intended, as well as look at the
    relevant test plans and results. They will want
    to see that what has been built and tested
    matches the agreed design. They may ask for
    copies of results and settings to be supplied as
    an official record.

4
  • The Tester will also carry out checks on the
    Inverter, and supply Ausgrid with a copy of the
    Inverter settings (generally with a screenshot
    direct from the Inverter software).
  • Organizing both a Witness Tester and Ausgrid for
    the same day can be a challenge, so you will need
    to be flexible in your choice of date and time.
    At BCJ Controls we can carry out the testing, and
    make the arrangements with Ausgrid for you
    saving you a good deal of hassle! We can cover
    the entire Ausgrid service area, including Sydney
    Metro, Central Coast, Newcastle, Hunter Valley,
    and Muswellbrook regions.

5
  • At BCJ Controls we offer Ausgrid Witness Testing
    as a service to commercial solar installers who
    want to get their solar installation over the
    mark with Ausgrid.
  • Generally we coordinate Ausgrid and our tester so
    that there is someone to test the relay in front
    of the Ausgrid representative. Give us a call on
    02 9534 8465 to arrange.

6
Visit us
Systems to Help You Connect
  • www.bcjcontrols.com.au

2,17 Lorraine St Peakhurst NSW 2210
Write a Comment
User Comments (0)
About PowerShow.com