Three Keys for maintaining salted swimming pool

1
Three Keys for maintaining
Three Keys for maintaining
Salted Swimming Pool
Salted Swimming Pool
http//usamanagement.com
2
INTRODUCTION
When it comes to maintaining your salt swimming
pool, there's 3 main variables that every
swimming pool operators needs to give more
attention.Your salt pool system is not any
totally different. Ultimately, you would like
to be proactive and catch any problems before
them going down. It is a lot less costly to
follow these procedures instead of reacting to
things and paying for repairs once they've taken
place. Follow Following parameters and you'll
enjoy a sparkling pool all season long.
3
Salt Swimming Pool Maintenance key 1
Always make sure there is sufficient saline
(salt) in the swimming pool water. Most units
operate best when the salt reading is 2700 to
3400 ppm. Check your model to see what the
manufacturer recommends. This number can vary
quite a bit. Always make sure you're in the
"ideal" operating range.
4
Salt Swimming Pool Maintenance key 2
Test your pH scale levels once per week. Salt
pools usually have a tendency to fairly quickly
increase pH scale levels. this will cause scaling
on your water line to require place sooner rather
than later. Scaling, or calcium buildup, is
additionally extraordinarily tough (and may be
costly too!) to remedy. Most of the time you will
find that the pH scale levels have up. during
this case, add muriatic acid (with the
instrumentality running) to bring it down.
Ideally, you would like the pH scale to be within
the vary of 7.2-7.6 ppm.
5
Salt Swimming Pool Maintenance key 3
To generate chlorine, it's paramount that the
salt cell be cleaned periodically. Just because
most salt generators advertise themselves as
"self-cleaning" doesn't mean you never have to
manually clean the internals of the cell. Think
about the filters in your home A/C unit.
6
Salt Swimming Pool Maintenance key 2
Test your pH scale levels once per week. Salt
pools usually have a tendency to fairly quickly
increase pH scale levels. this will cause scaling
on your water line to require place sooner rather
than later. Scaling, or calcium buildup, is
additionally extraordinarily tough (and may be
costly too!) to remedy. Most of the time you will
find that the pH scale levels have up. during
this case, add muriatic acid (with the
instrumentality running) to bring it down.
Ideally, you would like the pH scale to be within
the vary of 7.2-7.6 ppm.
7
Continued.....
Every month to 6 weeks they get replaced right?
This reduces the amount of "friction" that the
air experiences and ultimately, it can reduce
your utility bill. Well, your salt system isn't
much different. It's a lot more efficient for the
water to pass through the cell and for salt to be
generated when there's no scale or buildup on the
plates. To get more information you can also
visit professional pool management services.
8
CONTACT US
http//usamanagement.com/swimming-pool-marketing/