Different grouting methods to keep your tiles clean

1
Different grouting methods to keep your tiles
clean
2
(No Transcript)
3
Grout on the tiles can make it look awful.
Irrespective of how pricey the tiles are, they
are all vulnerable to grout. There are a number
of ways using which a homeowner can get rid of
grout. In order to find the most effective method
of grout cleaning you need to acknowledge how
intense the stain on the tile is. There is a
fair chance that the grout might be so intense
that the only available option is to remove the
effected tile.
4
Here are some common and effective grouting
methods to keep your tiles clean.
5
Clean with a detergent You can make use of a
small scrubbing brush and a milk detergent to
clean the grout. This is the most effective
method to clean the grout. It works well
especially against the grout that is slightly
dirty. You can mix a mild detergent in lukewarm
water and brush it using the scrubber on the
affected area. Start with small area and then
move further.   Use oxygenated cleaners The
oxygenated cleaners give out less fumes that
those regular bleaches. You can use this method
to clean the moderate stains from the tiles.
Follow the instructions and directions given on
the box to mix the cleaner in appropriate
proportion. Then you can scrub the grout using a
toothbrush. Use of oxygenated cleaners is also
good for general tile cleaning. It contains
grouting chemicals that help retain the luster of
the tile.
6
Chlorine bleach with water You must always use
the bleach with due care since the bleach has the
ability to discolor the tile and the grout.
Simply mix a small section of the regular
chlorine bleach in 4 parts of the water. Spray
or wipe the same on the affected area. Let it
stay for 10 minutes and then wash it off with
warm water. Hydrogen peroxide cleaning This
grouting material can be a little dangerous so it
is always advisable to wear gloves when using it.
Please note that this method will work well only
if you are using it on the white grout as
hydrogen peroxide is a very powerful bleaching
element. You have to mix it in the ratio of 11
with water and then test it on a small portion of
the tile. Leave it for 15 minutes and then rinse
it off with water.
7
White vinegar and baking soda You have to mix a
small proportion of white vinegar in baking soda.
Further scrub the solution on the grout lines by
using a small brush. Work on the small section
and then move further. These are some common
grouting methods. Today there are a number of
professionals also who can carry out this task
for you. So what are you waiting for? Call a
professional now and get your tiles cleaned.
8
Thank You!Visit Us by clicking here