How to Work With a Plasma Cutter?

1
How to Work With a Plasma Cutter?

• http//www.ahpwelds.com

2

• When you are operating a plasma cutter, you will
  need to handle it with adequate safety and follow
  the safety procedure when working with a plasma
  cutter. Any type of electrical equipment such as
  acdc welder has got safety clothing and
  procedures to ensure the safety of the person
  when working with the equipment. If you are
  someone who is working with a plasma cutter for
  the first time, then you will need to know how to
  operate a plasma cutter safely. This article will
  take a look at how to work with a plasma cutter.

3

• Some safety rules
• Wear gloves.
• Keep your hands and clothing dry.
• Use metal to metal connections.
• Do not attach any fallen work-piece to the work
  cable.
• Make sure the surface is clean.

4

• Steps to work with a plasma cutter
• First of all, choose any good brand plasma
  cutter. There are various types of plasma cutters
  that you can choose from easily. Make sure it has
  the required features that you need for your
  work.
• Take a look at the thickness of the material you
  are going to cut and which what speed you would
  like to cute the metal with.
• Then you will need to select a working location,
  i.e. where you will work with the plasma cutter.
  Make sure the surface where you are going to cut
  the metal is safe and allows free movement
  easily.

5

• After that, you will need to plug the unit and
  make sure that it is off.
• Connect the external air compressor carefully and
  properly to the cutter. And then turn on the air
  flow of the cutter.
• Then you will need to set the metal onto the
  table. Attach the ground clamp to place where you
  will cut the metal with the cutter.
• Then you will need to switch on the machine by
  pressing the ON switch.
• Set the appropriate current
• Press the trigger on the gun to start the cutter
  to cut the metal. And keep it close to the metal
  while cutting it.
• After work, switch off the machine and then keep
  away the additional tools.

6
Contact Us

• Contact Media
• Name Jean Robinson
• Company/Organization name AHP Tools Inc
• Email sales_at_ahpwelds.com
• Web http//www.ahpwelds.com
• Phone No 925-391-3599