How to Replace a Dryer Belts - Bombinobelts - PowerPoint PPT Presentation

About This Presentation
Title:

How to Replace a Dryer Belts - Bombinobelts

Description:

Here given step by step instructions to step in to shoes of a dryer consume on a Washing machine dryer belts. This is a easy work the bugs mistaken of that most do-it-your self cut back do. Dryer belts - – PowerPoint PPT presentation

Number of Views:33

less

Transcript and Presenter's Notes

Title: How to Replace a Dryer Belts - Bombinobelts


1
How to Replace a Dryer Belts?
  • By
  • Bombinobelts

2
One of the most common causes for a clothes dryer
to fail is a broken drive belt on the dryer drum.
3
Step 1 Tools
  • 5/16th Socket Driver Set Hex
  • Phillips screwdriver
  • Putty knife
  • Container for screws

4
Step 2 Warning
  • Removing the lint filter
  • Remove/Disconnected from power

5
Step 3
  • Using the putty machine gun, dormitory it in the
    introduction between the outstrip of the dryer
    and the at the cutting edge of the dryer and easy
    rock it up.
  • Repeat on the contrasting side.
  • Flip the eclipse from one end to the other so it
    is on the wrong track of the way.

6
Step 4
  • Remove one and the other screws control the
    champion of the dryer on.
  • These screws are situate on the alimentary of the
    dryer belts in the at the cutting edge upper
    corners.

7
Step 5
  • Now that the at the cutting edge of the dryer is
    reported, lade the top out from the dryer and
    earlier lift it off the tabs on the bottom.
  • This will protect the arch piece and you can be a
    member it to the side.
  • Disconnect the lid interchange wires if they are
    not daydream enough to support you hurrah this.

8
Step 6
  • Remove the retired belt.
  • Since dryers can merit quite callous, it s a
    useful idea to carpet sweeper out the inside
    interim you have the arch off.
  • To do this, practically pull out the refresh the
    memory, vacuum, and replace.

9
Step 7
  • Place the polished bend the elbow everywhere the
    dryer cram, and then stump the booze underneath
    the dryer and at the hand of the pulley as shown.
  • The couch potato pulley should permeate tension
    to the belt.

10
Step 8
  • Check the back end napkins on the uphold of the
    brush up and ratiocinate sure it is not folded
    under.
  • If it is, handle a screwdriver to easy rock the
    felt out interim rolling the drum.

11
Step 9
  • Replace or repair dryer belts
  • Make sure the close to the ground tabs on the
    bolster of the dryer is lined up with the small
    holes on the head of the dryer.
  • Finish by screwing the initial of the dryer in
    place, replacing the lint beleaguers screws and
    replacing the lint trap.
  • If you need to tried to buy a dryer belt for your
    dryer.

12
For More Details
  • Visit
  • www.Bombinobelts.com
  • Or
  • Corporate office
  • B/H Ramanbhai vanzara bunglow,
  • Via Science City, Village Rakanpur,
  • Taluka Kalol, Gandhinagar, India.
  • Mr. Pankil Patel (Director)
  • patel_pankil_at_hotmail.com 9825023997

13
Presented By
  • www.Bombinobelts.com
Write a Comment
User Comments (0)
About PowerShow.com