Peckomatic Demand Bird Feeder Kit - PowerPoint PPT Presentation

About This Presentation
Title:

Peckomatic Demand Bird Feeder Kit

Description:

PECk-O-MATIC Demand Bird Feeder kit is a highly reliable, on-demand gravity feeder that keeps your feed secure and away from elements and mice. – PowerPoint PPT presentation

Number of Views:40
Slides: 14
Provided by: peckomatic_123
Category: Pets & Animals

less

Transcript and Presenter's Notes

Title: Peckomatic Demand Bird Feeder Kit


1
PECk-O-MATIC Demand Bird Feeder Kit
  • PECk-O-MATIC

2
PECk-O-MATIC Assembly Instructions
3
Step 1
  • Verify all contents of your PECk-O-MATIC Demand
    Feeder kit. It should contain the following

One Feeder-Funnel
One Trigger-Rod
One Catch-Dish
One Catch-Dish-Lock
Six Regulator-Disks
One Pail-Hanger
4
Step 2
  • Prepare your round pail (not included in this
    kit) to insert Feeder-Funnel by drilling or
    cutting out 4 hole at the bottom center of your
    pail.

Pail
5
Step 3
  • Review the pictures of the six Regulator-Disks.
    Review its openings and recommended feed to use
    with each Regulator-Disk.

6
Step4Based on your feed and recommended
Regulator-Disk opening, select one Regulator-Disk
to use with your feed. Note If you find our
recommended opening too small or too large,
change to another disk. You can also make your
own disk with your desired opening to use with
PECk-O-MATIC.
7
Step 5
  • Securely hang your pail using the Pail-Hanger (
    or Pail-Holder or Pail-Stand sold separately) so
    that the bottom of the pail is at least 14" above
    floor level and insert the tube end of the
    Feeder-Funnel from inside the pail. When properly
    inserted, this Feeder-Funnel should seat tight
    against the inside wall of the pail with the
    entire tube end of the funnel sticking out
    through the bottom hole.

8
Step 6
  • Place the Regulator-Disk you selected at the
    funnel opening.

9
Step 7
  • Insert the long end of the Trigger-Rod from
    inside and position it at the center of the
    Regulator-Disk opening.

10
Step 8Insert the Catch-Dish from the long
end of the Trigger-Rod and lock it at desired
height using Catch-Dish-Lock by lightly pressing
together two open ends, pass the Trigger-Rod thru
the holes, and release.
11
Step 9To test your feeder setup, put two cups
of feed into the pail while keeping the
Trigger-Rod somewhat at the center of the
Regulator-Disk. Then wiggle Catch-Dish to make
the Trigger-Rod oscillate and see small quantity
of feed is dropping. Change the Regulator-Disk to
increase/decrease quantity of the released feed.
12
Step 10To train your birds, put one cup of
feed in the Catch-Dish and see how quickly they
learn.
13
Contact USAddress 6562 Ridings Rd, Syracuse,
NY 13206 Phone 315-362-9772 Website
www.peckomatic.com Email sales_at_peckomatic.com
Write a Comment
User Comments (0)
About PowerShow.com