Furnace Troubleshooting & Repair Tips

1
Furnace Troubleshooting Repair Tips
If you hear abnormal noises or the heating system
has shut down, you may be in need of a furnace
repair.
2
Confirm your thermostat is set to heat
If your furnace has collapsed or is not heating
properly, maybe its not a problem with the
furnace. It could be a thermostat issue. 
Check the settings if theyre on HEAT mode and
not on the COOL mode. 
Clean the outside and insides of the thermostat
by opening the thermostat panel to remove any
dust and dirt.
HEAT MODE
COOL MODE
3
Change your furnace Air Filter
If your furnace is creating problems, one of the
most probable causes is that the furnace filters
have gotten clogged.
You should swap out your homes air filters
around every three months to help your system run
more efficiently and prolong any furnace repair
work. 
4
Make sure the gas valve is open
Something as simple as a closed gas valve can
stop your whole heating system. 
 The combustion gases enter the furnace from the
gas valve. 
So if its closed, no gases will enter and the
furnace wont light up. If its closed, turn it
back on and your furnace should be good to go.
5
Inspect the Air Ducts
You know it that air-ducts are the culprits when
only certain parts of your house are not heating
up.
 Air ducts distribute the hot air throughout the
house and carry to each room from one location
i.e. your furnace. 
So if certain parts of your house are not heating
up, check the air-ducts handles and make sure
theyre parallel to the air-duct. 
6
For More Details Contact Us
www.redlineheating.com
Service_at_redlineheating.com
452 Washington Ave, Loveland, CO, 80537