Copper Plating and Its Uses

1
(No Transcript)
2
Copper plating services involve the coating of
copper on to another material though in most
cases it is another metal. The electroplating
service has been designed to enhance the
strength, durability or visual appeal but in many
other cases the copper plating services are used
especially to improve the electricity and heat
conductivity of material copper plating services
are especially used in cookware and wiring. There
are some cases where the copper plating services
are also used for decorative purposes so as to
give objects a much desired brassy look but in
majority of cases it is basically used on
electrical wires because copper is an excellent
conductor of electricity and is especially used
on circuit boards.
3
It is an open secret that copper is an
exceptional conductor of heat and, as a result,
copper plating services are also used on
cookware. Apart from the speed at which copper
heats, it allows for even heating on surfaces
therefore allowing for more even cooking. Ask any
professional chef and you will discover that they
are in love with copper cookware which is
especially lined with steel in order to increase
its durability the only challenge is that this
type of cookware is a little expensive and may
not fit the budget of many hobby cooks. Pots and
pans that are plated are usually steel or
aluminum that are plated with copper copper
plating services enable consumers to afford the
benefits of copper without having to pay more for
pure copper alternatives.
4
Copper plating services are often employed using
the electroplating service. For those that are
daring enough some level of electroplating can be
done at home but because it is fraught with
danger you are better off leaving the same to
NADCAP metal finishing companies. You probably
remember the setups of the electroplating service
such as what are often used during science
demonstrations in high school but in most cases
it is the nickel that is used as a plating
substance instead of copper.
5
During the electroplating service salt is
dissolved in a solution and the molecules are
broken apart to form positively charged copper in
addition to negatively charged sulfur ions.
Because the cathode will be hooked to the
negative output of a battery it becomes charged
negatively. The negative charge attracts the
copper ions in the solution and they adhere to
the outside of the object. Meanwhile, the copper
atoms from the anode are being pulled into the
solution, replenishing those that are attaching
to the non-metal object. Copper will passively
adhere to iron-based substances when placed in a
solution of this type. Passive transfers do not
retain the plating, so are useless for this
purpose. In order to plate iron or steel with
copper, a coating of nickel must be applied to
the iron first.
6
9850 Waples Street
San Diego CA 92121
[phone]
www.sheffieldplaters.com