6 Ways To Keep Machine Tools Well Maintained

1
6 Ways To Keep Machine Tools Well
Maintained When it comes to keeping your machine
tools well maintained, it is very essential to
ensure their durability and performance. Be it
maintenance, routine check up or particular
attachments, keeping machinery tools up to date
is the foremost thing to consider. Anything can
happen to them if heavy machineries are not
checked routinely and well maintained
CNC machines and machine tools are the backbone
of the manufacturing sector. They are the
machines that are responsible for building
other machines for all industries. And therefore,
ensuring smooth functioning of such machines is
not only critical for the machine tool industry
but the manufacturing sector as a whole. Good
quality machine tools can be a heavy investment
but at the same time they work for long
time. Given below are some of the ways you can
keep your machine tools well maintained.
2

• Check The Lubrication
• First thing to keep in mind and implement is
  checking the lubrication of machine tools
  which are frequently used. In this
  case, it is very important to inspect the
  lubrication levels on a regular basis. By making
  sure that the equipment are lubricated properly,
  you can easily protect their motors over an
  extended period. It includes greasing and oiling
  of moving parts or components of all tools.
  Always have the right amount of oil or use other
  lubricants to make your machine tools work
  without any break downs.
• Sharpen Key Parts
• If you are using machine tools that have
  components built for cutting, slicing,
  sharpening or chopping, then you should
  make sure that the parts maintain their
  sharpness. If you are using laser parts for
  cutting, then ensure these parts are also
  in proper condition. If there isnt routine
  maintenance performed on specific accessories
  which need to retain their sharpness for optimum
  performance, you would be putting your production
  quality at a high risk. Ensure those equipment
  used for cutting are sharpened properly.
• Check Alignment Specifications
• Another important maintenance step is to
  stop any attachment or component from being
  out of alignment. Component misalignment may
  adversely affect the machine's performance. To
  decide if your machine tools are aligned well,
  simply go for a few test jobs and test
  the

accessories to check how their parts are
currently working.
3

• Examine The Cleanliness
• Even though this is obvious, you must make sure
  that your machine tools are cleaned regularly.
  By cleaning different pieces of machines
  either daily or weekly, you will make sure
  that they are running at optimum capacity. The
  cleanliness of machines must be taken care
  of to avoid breakdown of particular parts. When
  machines collect a lot of grime or start rusting,
  long term problems may occur.
• Take Good Care of Parts Equipment
• So as to correctly maintain your machine
  tools, it is important to have routine
  maintenance checks on all of the
  accessories and parts. An important aspect
  of this preventive care is to ensure that
  all of your machine accessories and equipments
  are handled with care and stored safely. You
  absolutely dont want to be sloppy with any of
  your machine parts. Do all you can to detect
  possible problems. All problems can be tackled
  more easily when detected early on. Keep a
  checklist and carefully login all maintenance
  performances to proceed further.
• Don't Overwork Your Machines
• Dont surpass your machine parts stated
  performance limitations and specifications as
  found in your owner manual. Knowing weight limits
  for inclines and loads for transit are a simple
  way to keep machine tools well maintained. Most
  machine tools are programmed with multiple
  power modes. And that is why it is
  important for operators to ensure their

machine parts are set to the correct power mode.
4
To Conclude By following the above simple
precautionary measures, you can prolong the life
of your machines and save yourself from
unpleasant shocks and machine breakdowns. A good
rule of thumb in this regard is to check all your
machine parts regularly and keep them
in optimum working condition.