How To Use A Circular Saw

1
How To Use A Circular Saw
2

• Circular saw is one of the most convenient
  portable power tools, but it is potentially very
  dangerous. Make sure you understand how to use
  this tool safely.Make sure you use the right
  knife and properly installed and tightened.
  Always use a sharp blade. Dull blades bind and
  overheat.

3

• Check the blade guard. Is it in good condition
  and working properly?Adjusting the blade depth
  of no more than one-quarter of an inch thick wood
  to be cut. The workpiece is likely to relax, if
  you have too much blade exposed.

4

• Support on both sides. Place it on one side, if
  necessary.Look for knots and nails before you
  start. Avoid them if possible if they can not be
  avoided, be careful when approaching them.Start
  the blade before its meets the work.

5

• Stand to the side when you was in the case of
  wood is kick back and not too fit. You should
  always have both feet planted firmly on the
  ground.Do not push the saw, just guide it with
  a little pressure.Shelves on the trigger, if
  the blade is attached, and a wooden wedge sticks
  to the court to release him.

6

• Wait for the blade to stop before removing it
  from the timber.If you want to buy and views
  details of circular saw, visits at Baganmart.com,
  which is Myanmar B2B e-commerce paltform and
  online shopping for Myanmar Business products
  buyers.

7
Thanks for watching

• www.baganmart.com
• www.facebook.com/baganmart
• www.twitter.com/_at_BaganBlog