Optimal Aeration Solution for Aquaculture - AirOxi Tube - PowerPoint PPT Presentation

About This Presentation
Title:

Optimal Aeration Solution for Aquaculture - AirOxi Tube

Description:

AirOxi Floating Grid are Aeration Grid with floats, specially designed for immediate use. Just connect to power supply and it starts highly efficient aeration. To know more visit: – PowerPoint PPT presentation

Number of Views:99

less

Transcript and Presenter's Notes

Title: Optimal Aeration Solution for Aquaculture - AirOxi Tube


1
Optimal Aeration Solution for Aquaculture
www.airoxitube.com
2
About AirOxi Tube
  • AirOxi is one of the latest technologies for
    Aquaculture Aeration.
  • Specially designed for commercial use.
  • Airoxi has been installed in hundreds of acres of
    aquaculture ponds till date.

3
Our Aeration Products
  • Airoxi tube.
  • Airoxi Self sinking tubes.
  • Airoxi Grid.
  • Airoxi floating diffuser grid.
  • Fittings for Airoxi Tube.
  • Airoxi tube rings.

4
AirOxi Tube
  • AirOxi Tube is made from a special blend of
    polymers and additives to give it micro holes.
  • Airoxi tube is rohs certified.
  • The micro holes ensures small bubble size and
    high standard oxygen transfer rate and standard
    aeration efficiency


5
AirOxi Self Sinking Tubes
  • The AirOxi self sinking tubes can be installed
    even after the ponds is filled with water.
  • They are drop and use design and the rings will
    stay 1 foot above the pond bottom.

6
AirOxi Tube Grid
  • The airoxi tube grid is 10 mtrs in each grid,
    with flow control valves.
  • Ready to install.
  • No hassles about installing before season.
  • Can be also made self sinking grids on order.



7
AirOxi Floating Diffuser
  • Airoxi floating diffuser is ready to use aeration
    grid with floats specially designed for immediate
    use.
  • Just connect to power supply and it starts.
  • No piping or separate blower required.
  • Non- return valve to separate blower from water.
  • Modular design for easy assembly and storage.

8
Fittings for AirOxi Tube
  • Standard fittings like jointer, start connector
    / take off, end plug and T, which are needed for
    assembly and fitting for the tube.

9
AirOxi Tube Rings
  • Airoxi tube rings are ready to use 1 mtr rings.
  • The number required depends on the blower size.

10
Why AirOxi Tube ?
  • The oxygen dissolves faster and more uniform.
  • It reduces electricity cost by 50.
  • Airoxi tube does not splash water or
  • disturb aquatic life.

11
Why Airoxi tube?....
  • Its low in maintenance.
  • It helps in the improvement of
  • Food conversion ratio.
  • It increases the yield of fish, shrimp,
  • prawns by 10.

12
Why Airoxi tube?....
  • It reduces noise upto 75.
  • It can be used 24x7.
  • The installation is less expensive
  • and does not require special infrastructure.

13
Contact us!
  • www.airoxitube.com
  • https//www.facebook.com/airoxitube/
  • info_at_airoxitube.com
  • 91-7285017087

14
Thank you !
Write a Comment
User Comments (0)
About PowerShow.com