Title: NTC 405 Read, Lead, Succeed/Uophelpdotcom
1NTC 405 Read, Lead, Succeed/Uophelpdotcom
- For more course tutorials visit
- www.uophelp.com
2NTC 405 Entire Course
- For more course tutorials visit
- www.uophelp.com
-
- NTC 405 Week 1 DQs
- NTC 405 Week 1 Individual Networking Protocols
and Port Numbers - NTC 405 Week 1 Supporting Activities
Differentiated Activities - NTC 405 Week 2 DQs
- NTC 405 Week 2 Individual Transmission Methods
- NTC 405 Week 2 Supporting Activities
Differentiated Activities - NTC 405 Week 3 DQs
- NTC 405 Week 3 Individual Ethernet Switching
Modes - NTC 405 Week 3 Supporting Activities
Differentiated Activities - NTC 405 Week 4 DQs
- NTC 405 Week 4 TCP/IP
- NTC 405 Week 4 Supporting Activity Multiplexers
- NTC 405 Week 5 DQs
- NTC 405 Week 5 Supporting Activities
Differentiated Activities - NTC 405 Week 5 Learning Team Final Learning Team
Paper Presentation
3NTC 405 Week 1 DQs
- For more course tutorials visit
- www.uophelp.com
-
- What are the components of network system
design?What role do standards play in ensuring
smooth communication? What role do protocols play
in ensuring communication of data?What issues
would develop if businesses did not follow the
guidelines setup by oversight organizations to
control how networks communicate?
4NTC 405 Week 1 Individual Networking Protocols
and Port Numbers
- For more course tutorials visit
- www.uophelp.com
-
- Resources SkillSoft (2013). CompTIA Network
2012 Networking Concepts Part 2.Complete the
Networking Protocols and Port Numbers module in
Skillport.Write a memo to a business manager
that is not familiar with network communication.
Describe the role of protocols in network
communication.Answer the following in the memo
in 200 to 300 words each1. What widely used
networking protocols support or make possible
video calls also known as video
teleconferencing?What role does each protocol
play in the video call process?Include basic
connectivity roles.2. What is a troubleshooting
model? Describe how you would use a
troubleshooting model to resolve a users
inability to connect to the Internet from a
physically connected networked laptop in an
office. What protocols are used in this situation
to connect a networked laptop to the Internet?te?
5NTC 405 Week 1 Supporting Activities
Differentiated Activities
- For more course tutorials visit
- www.uophelp.com
-
- Hands-On Supporting Activity LabSim Network
2009 1.0 Networking BasicsNote. Continue with
this module through Week Four.Resource LabSim
Network 2009 1.0 Networking BasicsCreate a
screenshot of the last LabSim page of each
lesson in the module showing the outcome for the
section.1. Press Alt Print Screen on your
computer keyboard to create a screenshot.2. Open
a blank Microsoft Word document.3. Press Ctrl
V on your keyboard to paste the screenshot into
the document.Supporting Activity ARPANETWrite
a 200- to 300-word short-answer response for the
followingARPANET is considered the beginning of
networking. What was ARPANET and why was it
developed?What other organizations played a role
in the development of ARPANET, and what was the
purpose behind each of these organizations?
6NTC 405 Week 2 DQs
- For more course tutorials visit
- www.uophelp.com
-
- How is knowledge about how analog and digital is
used in relation to your own business or home
network important?What are the reasons that some
businesses have not embraced digital entirely and
is it actually affecting their bottom line?Even
though more and more companies are embracing the
use of fiber-optic cabling, are the benefits
significant for all types of businesses? Explain
why or why not.What type of communication
equipment is in use in your business network? How
is it different from what is used for home
networks? Explain why.
7NTC 405 Week 2 Individual Transmission Methods
- For more course tutorials visit
- www.uophelp.com
-
- For assistance with this type of assignment,
review these resources.Address the following in
your presentationDescribe the various
transmission mediums and explain the best use of
each with various examples of business
use.Identify communications capabilities of each
medium and the types of signals that are used for
each.Identify the various protocols that are
available for use and provide a recommended
standard that should be used as the most
efficient communication within a business.Use
outside research to show how these standards have
been used in similar companies to explain your
choice.List major points in the slides. Include
detailed explanations in the speaker notes
section that correlate to each point.
8NTC 405 Week 2 Supporting Activities
Differentiated Activities
- For more course tutorials visit
- www.uophelp.com
-
- Hands-On Supporting Activity LabSim Network
2009 2.0 Cables and ConnectorsResource
LabSim Network 2009 2.0 Cables and
ConnectorsCreate a screenshot of the last
LabSim page of each lesson in the module showing
the outcome for the section.1. Press Alt Print
Screen on your computer keyboard to create
ascreenshot.2. Open a blank Microsoft Word
document.3. Press Ctrl V on your keyboard to
paste the screenshot into the document.Supporting
Activity Networking SignalsWrite a 200- to
300-word short-answer response to the
followingNetworking signals are sent either
through analog or digital methods. What is the
difference between the signal types and why is
digital being used more frequently today?
9NTC 405 Week 3 DQs
- For more course tutorials visit
- www.uophelp.com
-
- What is the difference between a telephone
circuit connection and one used for data
transmission? Why have the lines between these
transmissions methods blurred over time?What are
different modes of circuit and packet-switched
networks?Although most businesses have looked
towards the use of T1 or greater connections in
the past, how has the use of DSL, ATM, cable
modems and fiber changed how businesses maintain
data communication in their companies?What are
the common types of methods for using these
networks, such as DSL, ATM, and so on? Which are
the most economical for business use and why?
10NTC 405 Week 3 Individual Ethernet Switching Modes
- For more course tutorials visit
- www.uophelp.com
-
- Ethernet is a common method of moving packets
along a network. Review the Advanced Ethernet
Switching modes in your Business Data Networks
and Telecommunications textbook.Write a 4 to
7-page paper describing these modes and how they
might be used in today's global network
environment.Include the following in your
paper Distinguish the basics between channels
and circuits. Explain the concept of Ohm's law
and its importance to circuit troubleshooting.
Compare circuit and packet-switched networks.
Based on your readings, define the network
protocols andhow they provide safety against
communications failure. Identify which types of
businesses would most benefit from this type of
technology. Provide examples of what currently
available systems can be enhanced and where
additional opportunities exist.
11NTC 405 Week 3 Supporting Activities
Differentiated Activities
- For more course tutorials visit
- www.uophelp.com
-
- Hands-On Supporting Activity LabSim Network
2009 5.0 Network ImplementationResource
LabSim Network 2009 5.0 Network
ImplementationCreate a screenshot of the last
LabSim page of each lesson in the module showing
the outcome for the section.1. Press Alt Print
Screen on your computer keyboard to create a
screenshot.2. Open a blank Microsoft Word
document.3. Press Ctrl V on your keyboard to
paste the screenshot into the document.Supporting
Activity Channel EstimationWrite a 200- to
300-word short-answer response to the following
questions Based on Kwak, et al (2008), how
does the use of channel estimation change the
ability to increase data communication? Is this
something that will allow companies to purchase
less bandwidth, but still allow for the same data
flow? Explain why or why not.
12NTC 405 Week 4 DQs
- For more course tutorials visit
- www.uophelp.com
-
- What are the pieces of the TCP/IP protocol suite?
How do they match with the various layers of the
OSI model as described in previous courses?What
other protocols are available and can they be
used in conjunction with TCP/IP? Explain why or
why not.How does equipment such as the
multiplexer make TCP/IP more efficient?
13NTC 405 Week 4 Supporting Activity Multiplexers
- For more course tutorials visit
- www.uophelp.com
-
- Write a 200- to 300-word short-answer response to
the following questionsMultiplexers are used to
help companies minimize their network
communications costs. How do they work and what
types of equipment are needed?With the newer
gigabyte equipment and increased use of
fiberoptic cabling, are multiplexers as necessary
as they once were? Explain why or why not
14NTC 405 Week 4 TCP or IP
- For more course tutorials visit
- www.uophelp.com
-
- Write a 4-7 page paper including the
followingAnalyze the current options available
for use of TCP/IP and OSI models for
businesses.Research options for improving the
current use of TCP/IP and recommend new software
and equipment thats available.Describe how use
of equipment, software, and multiplexing could
aid in improving use for communications which
would reduce network congestion. Use APA
formatting for the paper.
15NTC 405 Week 5 DQs
- For more course tutorials visit
- www.uophelp.com
-
- What types of topology have you noted in your
place of employment or your home network?What do
the various types of NOS have in common? What are
the benefits of each and on what do you base your
decision of choice?Are there some types that
would be more beneficial to specific businesses?
How do you actually work with each NOS?
16NTC 405 Week 5 Learning Team Final Learning Team
Paper and Presentation
- For more course tutorials visit
- www.uophelp.com
-
- Resource University of Phoenix Material Final
Learning Team Paper and PresentationSubmit the
final Learning Team paper and presentation. -
17NTC 405 Week 5 Supporting Activities
Differentiated Activities
- For more course tutorials visit
- www.uophelp.com
-
- Supporting Activity TopologiesWrite a 200- to
300-word short-answer response to the
following What are the main topologies used in
computer networks? What are some of the lesser
used topologies? What are the advantages and
disadvantages of each?Hands-On Supporting
Activity LabSim Network 2009 5.0 Network
ImplementationResources LabSim Network 2009
5.0 Network ImplementationCreate a screenshot of
the last LabSim page of each lesson in the
module showing the outcome for the section.1.
Press Alt Print Screen on your computer
keyboard to create a screenshot.2. Open a blank
Microsoft Word document.Press Ctrl V on your
keyboard to paste the screenshot into the
document
18NTC 405 Read, Lead, Succeed/Uophelpdotcom
- For more course tutorials visit
- www.uophelp.com