Air Intakes (1)

1
Air Intakes
2

• Looking for a little more power and sound out of
  your EJ platform? The Process West Cold Air
  Intake is the answer! The Process West Cold Air
  Intake Kit is designed to replace the restrictive
  factory air intake tract. It is fabricated from
  lightweight CNC mandrel bent aluminum tube and
  has a CNC machined air flow meter mount.

3
(No Transcript)
4

• It comes complete with a KN high flow air
  filter. The unit is painted silver for a flawless
  finish.Process West has taken the extra few steps
  to ensure smooth, consistent and abundant air
  flow. The Process West Cold Air Intake won't
  leave you disappointed!

5

• The COBB Tuning Heat Shield was designed to
  capture the cool air supplied to the SF Intake
  through the factory intake snorkle. Constructed
  of 16 ga. Aluminum the heat shield consists of a
  one piece surround, directional lid, and
  stainless fasteners that help reduce a loss of
  power that could be robbed from your motor by a
  heated intake charge.

6
(No Transcript)
7

• Unlike some cold air intakes, which places the
  filter in the front fender, our design helps to
  supply cool air through factory ducting, while
  eliminating the risk of water ingestion. Comes
  with all necessary hardware and full illustrated
  instructions.(Requires the use of the COBB SF
  Intake system)

8

• Increase horsepower and style under your hood.The
  PERRIN Performance BigMAF intake system uses an
  enlarged MAF housing to allow tuners to use the
  factory MAF sensor for tuning Subarus with large
  turbos.

9
(No Transcript)
10

• The BigMAF intake system requires ECU
  re-calibration in order to run properly on your
  vehicle. This BigMaf is designed to do two
  things Allow your ECU to accurately measure
  airflow above and beyond what the stock intake
  can measure. It is sized specifically to offset
  the use of 800cc fuel injectors.

11

• With a PERRIN intake system your car will make a
  throaty, deep tone on throttle that is undeniably
  modified. You will be able to hear your turbo
  spooling and hear your blow off valve every time
  it opens. Even the stock one.

12

• Constructed from precision CNC mandrel bent
  aluminum tubing for consistent and perfect
  fitting parts. Our MAF sensor bung is CNC
  machined for perfect fit and alignment of MAF
  sensor to intake. This is crucial for proper air
  fuel ratios and ECU engine management.

13

• AEM Intake Systems are designed to increase
  horsepower and torque gains as well as better
  engine sound when used as a replacement for the
  factory airbox and air filter. AEM intake systems
  are designed, tuned, and dyno-tested for vehicle
  specific applications. 

14
(No Transcript)
15

• These kits include an oversized AEM Dryflow
  synthetic washable air filter for optimum air
  flow, filtration, and performance while allowing
  easy oil-free cleaning. AEM intake systems use
  mandrel-bent aluminum intake tubes, and high
  quality hardware designed to reduce restriction
  and reduce intake temperature.

16

• For More Update, Visit Us

https//subimods.com/