Tanks Rebuildable of strictlyecig

1
Tanks Rebuildable of strictlyecig
2

• Rebuildables, or RDAs are tanks wherein the
  customer is meant to use their own choices of
  wire and wick to fire at any custom combination
  of resistances and materials. This is a bit more
  complicated, but allows the vaper to achieve the
  most customized and extreme results.

3
Nimbus V3 RDA

• SKU
• MODSNIM
• Brand
• Generic / Clone

4
Product Description

• This is an advanced dripping atomizer system for
  experienced users.
• Specs510 Connector / Tips Airhole size 1 MM
  Stainless Steel Grade 304
• 3 Terminals (with holes)
• Splash Shield

5
(No Transcript)
6
Be Advised

• 1 - The atomizer may become damaged if the mesh
  is not oxidized correctly.2 - Do not wind the
  wire too tightly around the pole.3 - A
  rebuildable coil / wick should always be tested
  carefully with a meter before it is used. Faulty
  wicks / coils will blow electronic devices.

7

• 4 - New coil / wick units should always be tested
  and then used first on a strong basic electrical
  APV such as a Silver Bullet, that will not be
  destroyed by a short circuit.5 - No new coil /
  wick assembly should be used on an electronic
  device until known to be safe.6 - These items
  have inherent risks and may go faulty at any time
  even if they were originally in good working
  order. The owner bears the cost of equipment
  damaged as a result.

8

• 7 - RAs or RTAs must only be used on equipment
  that cannot be seriously damaged or harm the
  user. In practice this could mean an electrical
  device with a hot spring (fuse) or an electronic
  device that will not activate if there is a
  short-circuit (a dead short). Unfused devices or
  unprotected electronic devices will suffer damage
  when used with a faulty RA or RTA.

9
Igo-w (PC Cap) RDA

• SKU
• MODSIGOCAP
• Brand
• Generic / Clone

10
Product Description

• Clear cap and drip tip for the IGO W family of
  dripping atomizers. Dual air holes for maximum
  air flow.

11
(No Transcript)
12

• Acrylic top cap
• Two step design on the cap
• Pre-drilled dual air holes
• 3 step design matching drip tip
• Dual o-ring
• Available for IGO-W atomizer

13
Igo-W4 RDA

• SKU
• MODSIGOW4
• Brand
• Generic / Clone

14
Product Description

• The new IGO-W4 is an upgraded version of the
  popular IGO-W. It features the same 3 hole post
  for easy dual coil builds. The main feature of
  the new IGO-W4 is in the cap design. It now has a
  larger volume top cap for extra airflow, for even
  more extreme vapor production. Stainless steel
  comes with silica wick, kanthal wires, and extra
  o-rings.

15
(No Transcript)
16

• Dripping atomizer
• Polished stainless steel finish
• Single air hole in top cap
• Triple-post system

17

• Fits most 510 drip tips (drip tips sold
  separately)
• Double o-ring seals on bottom base
• Height without drip tip 25.5mm (Approx.) 

18

• For details information, visit us

http//strictlyecig.com