How to select a suitable ceramic wall tile adhesive

1
How to select a suitable ceramic wall tile
adhesive
2
Introduction
There are several factors that are essential in
determining the kind of ceramic tile adhesive you
will use. Adhesive are necessary for the
installation of flooring and mural coverings.
Some of the factors include the complexity of
tile pattern you are going to design, kind of
surface that you are working on and also the
professional expertise of the person employed in
doing the job.
3
The best ceramic tile adhesives
Thin set mortars that are generally used for
tiling come in a powder form. The powder has to
be mixed with water to get the desired
consistency. In the place of water you can also
use a special acrylic additive for better bonding
and waterproofing. Thin set mortar is suitable
for all kinds of ceramic tile installations.
It provides a flexible and strong adhesion of the
tiles to your floor. In the areas where heat is
pretty high or wet surfaces are common, this
adhesive works best. If you are wall tiling, then
you can also use the premixed variety of ceramic
wall tile adhesive.
4
Tile adhesives are easily available in market and
you can get a wide variety of them as well, but
it is essential to pick the right ceramic tile
adhesive. Comparing several stores and
manufacturers will help you in getting better
product.
It is very essential to use these pre-mixed
varieties carefully as once they are set it is
hard to remove the tiles. It is essential that
the surfaces where you are going to spread
the ceramic tile adhesive are first cleared of
any debris and dust. While applying the adhesive
it is important to spread it evenly from the
center to corners. Alignment of these tiles is
also important to create better-looking designs.
The areas where you cannot spread the tile
adhesive you can carry out an alternative
procedure. Spread the adhesive at the back of
tiles and then apply it firmly to the surface for
bonding.
In case of shelves installation it is essential
to wait till the ceramic tile adhesive is
completely dry. The silicone tile adhesive
products can also be used to get waterproofing
and stronger bonding. These ceramic tile adhesive
premixes have several benefits that are as
follows.
5
Advantages of using pre mixed variety are

1. They stick to the tile right away. They stick
   even before it is totally dry.
2. It works well in damp areas like bathrooms and
   showers as well.
3. The adhesive is sure to serve this purpose
   wonderfully and give a very high quality finish.

6
For more information visit us on -
http//www.roff.in/2009/index.aspx
Thank You!