House inspection Auckland

1
House inspection Auckland
2
Innohome Ltd. was established in 2003 and in that
time it has delivered comprehensive builders
reports to hundreds of customers. Innohome
commits to provide clients with high quality
pre-purchase and pre-sale inspections and
reports, providing same day services, electronic
moisture detection for potential leaky
homes. The reports are accurate, unbiased and
the inspections carried out in reference with New
Zealand Standard NZ4306.2004 Residential Property
Inspections.
SPECIALIZED SERVICES
Non-invasive Moisture Test The non-invasive
moisture test requires a mixture of building
construction knowledge (old and new), a keen eye
for risk areas and use of modern technology and
certified training (Trotec T650, Trotec EC60V
infrared camera). The combination of these allows
Innohome to locate areas of concern without any
damage to the building. Non-invasive moisture
test meter T650S The T650 is a professional
instrument for fast, non-destructive
determination of moisture content distributions
in areas up to a depth of 4 cm from the surface.
As a quality instrument that is "made in Germany"
the T650 is impressive in terms of its digital
precision without the disadvantage of drift in
measured values exhibited by comparable analogue
instruments.
3
Damp and dry wall and floor areas can be detected
by permanent real time display of the measured
values. In addition, the device is suitable for
preliminary inspection of the maturity of
building materials in CM measurements. Invasive
Moisture Test Invasive moisture testing is
required when all non-invasive testing has been
completed. This can be achieved by minimum
intrusion (drilling a few small holes) and
measuring moisture content levels in the defined
area (holes can be filled). If data suggests a
problem with the owners permission surgical
removal of interior or exterior location can be
achieved. At this stage a report on damage and
repair cost can be obtained from Innohome. MMS 2
- Complete Protimeter Moisture Measurement
System The moisture you cannot see matters most
when cleaning and restoring a property after
water damage from storms, floods or fires. From
hidden mould to unseen structural damage,
undetected moisture damages health and property
and its oversight can create liability. Thats
why the right moisture meter makes all the
difference. The Protimeter MMS2, the latest
addition to GEs Protimeter product line, is a
4-in-1 instrument, ergonomically designed for
easy one-handed operation in measuring moisture
in materials in buildings and related structures.
It can measure surface moisture and moisture
below a surface, as well as acting as a
hygrometer to measure ambient air humidity.
4
The addition of an infra-red thermometer allows
the difference between dew point and surface
temperature to be calculated, as well as a wide
range of other important psychometric parameters.
The new instrument will help building
professionals such as surveyors, inspectors and
architects to assess building moisture levels
during new build and refurbishing activities and
assist in the diagnoses of moisture-related
problems in existing buildings.
Thermal Graphic Infra-red Camera Test
Thermal imaging camera EC60V has a high thermal
sensitivity and a high degree of accuracy. Its
image sensor has a detector resolution of up to
160 x 120 measuring spots and a thermal
sensitivity of 0.08 ºC which enable to create
fully-radiometric thermal images within a
temperature range of between -20 C and 250 C.
A high image repetition frequency guarantees
continuous real-time thermal imaging. A variety
of integrated measuring functions and the
automatic measured value correction function
ensure optimum results every single time.
5
Thermal imaging camera EC60V
We use the Trotec EC60V thermal image camera in
non-invasive moisture testing. Although this is
our most expensive tool, it requires the correct
conditions to operate at its optimum. Again
combined with construction knowledge (old and
new) and a keen eye for risk areas Innohome can
locate areas of concern without any damage to the
building. Kevin has attained IR Level One
certification in the use and science of this
technology.
6
Contact Info Innohome House Inspections3 Spargo
Road,Massey,Auckland,0614 Phone  09 833
7290Kevin Mobile  [phone]Sing Mobile
 022 693 2593Email  info_at_innohome.co.nz