Electrical Safety - The 5 Safety Measures

1
Electrical Safety

• The 5 Essential Workplace Electrical Safety
  Measures

2
The following five safety measures should always
be applied when working on electrical
installations or equipment.
3
Disconnect the installations.
4
(No Transcript)
5
Ensure installation cannot be switched on
without your knowledge.
6
(No Transcript)
7
Check installation is not live.
8
(No Transcript)
9
Ensure the installation is earthed.
10
(No Transcript)
11
Remove or isolate potential conductors.
12
(No Transcript)
13
By always following these five safety measures in
the correct order, you can work safely. Once the
work is finished, reverse the procedure to put
the installation back to working order.
14
Learn more about workplace electrical safety and
make sure that you, your facility, and employees
are protect against all sorts of electrical
hazards with Current Solutions PCs 12 phase
electrical safety program.
15
A Presentation of Current Solutions PC
Click HERE to Request free Information about
choosing or using NFPA-70E 2012 HRC Tables Vs
IEEE 1584 Incident Energy Calculations
636 North Broadway, White Plains,
NY 914-347-8480 888-997-6937
www.CurrentSolutionsPC.com