How Alloy Casting Manufacturers Determine Defects?

1
How Alloy Casting Manufacturers Determine Defects?
2

• Iron casting is an alloy metal which is obtained
  by melting of pig iron, silicon, and carbon
  together in a furnace. The defects usually occur
  due to several reasons. Alloy Casting
  Manufacturers are able to repair some of the
  defects to an extent. In case, the defects cant
  be repaired then they need to eliminate castings.
  Tip to share Alloy castings must be cooled under
  low pressure to eliminate the risk of defects.

Tip to share Alloy castings must be cooled under
low pressure to eliminate the risk of defects.
3

• Defects can be occurred during pouring molten
  metal, molding, or solidification process. There
  are number of defect types that exist in an alloy
  casting and out of all the reasons, porosity is
  the most common one behind the defect.
• Determining the alloy casting defects helps
  manufacturers and QA team to recognize the main
  cause behind it and ways to repair it. Here in
  this post we are sharing few casting defects that
  can be identified

4
(No Transcript)
5
(No Transcript)
6
(No Transcript)
7
Registered Office
Survey No. 160, Bhavnagar-Rajkot
Highway,Shampara 364 060 (Rajpara-Khodiyar)Dist.
Bhavnagar 91-278-2541097/2541099 91-278-254109
8 contact_at_trushapecastings.com http//www.trusha
pecastings.com/
Address Phone Fax Email Web Site
8
Thank You