Previse Inc'

1
Previse Inc.

• Bailey DCS Simulator

Bailey, Net 90 and Infi 90 are Trademarks of ABB
2
Bailey DCS Simulator

• We can make this DELL computer execute all the
  controls for your Infi 90 DCS

Connect your existing consoles and EWS tools !!
Add process simulation for a complete simulator
3
Presentation Objectives

• Bailey DCS Simulator
• What is it?
• Features and Benefits
• Applications
• Specifications
• Models and Pricing
• Availability
• Next Steps?

4
What is the Bailey DCS Simulator?

• For Bailey Net 90, Infi 90, Harmony users
• Software product
• Simulates behavior of Bailey DCS
• Function blocks, PCU, CIU
• Executes binary CFG controller files as-is
• Supports connection by native Bailey software
• Operator consoles, engineering tools
• Supports process simulation of your plant
• Internally within Bailey controller logic
• Externally via specialist process simulation
  software

5
Benefits

• Save Money
• Bailey DCS functions at a fraction of the cost
• Operator training facility without ABB hardware
• Direct connect to operator consoles as-is
• Reduce commissioning time
• Pre-test control changes before installing
• Use existing tools and knowledge
• No need to translate CAD or CFG files
• Edit CAD CFG Files with native ABB tools
• Train new staff about Bailey DCS

6
Applications

• Operator training simulator
• Control systems development
• Test new consoles before installing
• Console factory acceptance test (FAT)
• EI technician learning tool
• Product lab RD and QA Support

7
Case Study Avon Lake GS Training Simulator

• Operator Training Simulator

8
Function Code Support

• Currently supports
• 100 of the most commonly used Function Codes
• To 400,000 blocks spread over 40 controllers
• Correct function block behavior
• Specifications
• Outputs
• Exceptions and console control
• Tuning and adaptive tuning
• Validated via extensive automated test
• Available upon request
• Additional Function Code support
• Assessment of your application

9
MFC/MFP Controller Support

• Simulates behavior of MFC/MFP controllers
• Uses MFC04 model as basis
• Support to 40 controller modules at same time
• Supports
• Executive, extended executive, segment control
• Correct execute frequency for program segments
• Controller startup and exception behavior
• Communication between controllers

10
IO Module Support

• Currently supports
• IMDSI02, IMDSM05, IMDSO01, IMDSO01
• IMDSO03, IMDSO04, IMASI02, IMFBS01,
• IMASO01, IMASO02, IMAOM01, IMDSM04, CIS
• Available if required
• Support for any other IO module
• EXCEL sheet connecting to your IO
• Provides IO connection port
• External connection of simulated IO

11
CIU Support

• Currently supports up to 8 CIU
• CIU04, INICT03 (serial) via COM port
• TCP/IP network CIU for Previse operator consoles
  OPC server
• Additional support available upon request
• INICT03 via high speed SCSI
• Any other CIU
• All CIU work at same time
• Al connected devices work together

12
Operator Console Support

• Currently tested to support
• ABB Conductor NT v3 and v4, ABB SEMAPI
• Previse OPsCon
• All via serial RS-232 connection
• Available upon request
• Any other console
• SCSI connection (INICT03 emulation)
• Up to 8 CIU for console or EWS connections
• Console configured same as in Control Room
• Console support includes
• Normal exception behavior and operator controls
• Trends and alarms supported
• Tuning (some possible limitations)

13
Engineering Tools Support

• Currently tested to support
• CADEWS, WinCAD, and WindowView
• Support available upon request
• ComposerIT, CLS and other tools
• Simultaneously supports
• Multiple engineering tool connections
• Engineering tool plus operator console connection
• Up to 8 simultaneous CIU connections

14
Simulator Client Functions

• Restart, Pause Continue your simulation
• Save and Restore process state
• Save 200 MW state Restore 400 MW state quickly
• Execute at real time speeds
• Or accelerate up to 10 X real time speed
• Read and write values directly
• Block values, Specifications, Field IO
• Monitor dozens of Watch Points as they change

15
Simple DCS Configuration

• Simple INI file used to configure DCS
• List the modules and addresses
• Pick up CFG files at startup
• Switch to another DCS in seconds.

16
Interfaces

• CIU
• CIU04 and INICT03(serial) as already mentioned
• Microsoft Event Log
• Extensive diagnostic messages
• Specialist software programming interface
• To connect external process simulation software
• If you are interested, well take care of this so
  you dont need to
• Coming Soon
• Standard OPC Data Access connection
• Connect any OPC Data Access client

17
Operating System Support

• Microsoft Windows 2000, XP or 2003.
• Recommend Windows XP Pro with hyper threading for
  large systems
• Microsoft mandated platform testing completed
• Executes as standard service
• Recommended Minimum Platform
• Pentium IV, 1GHz, 128MB of RAM, USB port, other
  ports as required
• Performance Benchmark
• 26 controllers, 71,000 blocks, 2 CIU
• Computer
• 3.2Ghz Intel CPU
• 128KB 500 MHz RAM
• Windows XP with hyper threading
• Less than 3 CPU load

18
Models US Pricing
Prices affective as at May 2005. Product Price
List subject to change without notice.
19
Availability

• Available now with support for
• 100 Function Codes
• Conductor NT, Previse OPsCon other operator
  consoles
• WinCAD, WindowView and other engineering tools
• Additional support available to meet your needs
• Any function codes, operator console or tools you
  need
• Request quotation direct from Previse
• www.previse.com

20
Next Steps?

• If you need to know more
• Questions to support_at_previse.com
• Ask us for a conference call to review your need
• With web based product demonstration if requested
• Ask us to quote your specific requirements
• Just call us.. Well walk you through the rest
• Free assessment of your application
• To see what additional support you may require
• To ensure our quote to you is 100 complete
• If you want us to work with existing suppliers
• Just ask us.. Well be happy to
• E.g. existing controls engineers or simulator
  vendor.

21
Thank You

• Question Answer