Title: Physics 2211, Spring 2002
1Physics 2211 Lecture 35Todays Agenda
- Recap of last lecture
- Using initial conditions to solve problems
- Problem Vertical Spring
- The general physical pendulum
- Energy in SHM
2SHM and Springs
Solution
3Velocity and Acceleration
Position Velocity Acceleration
by taking derivatives, since
4ExampleSimple Harmonic Motion
- A mass oscillates up down on a spring. Its
position as a function of time is shown below.
At which of the points shown does the mass have
positive velocity and negative acceleration?
5Example Solution
- The slope of y(t) tells us the sign of the
velocity since
- y(t) and a(t) have the opposite sign since a(t)
-w2 y(t)
a lt 0v lt 0
a lt 0v gt 0
a gt 0v gt 0
6Example
- A mass m 2 kg on a spring oscillates with
amplitude A 10 cm. At t 0 s its speed is
maximum and is v 2 m/s. - What is the angular frequency of oscillation ? ?
- What is the spring constant k ?
Also
So k (2 kg) x (20 s -1) 2 800 kg/s2 800 N/m
7Initial Conditions
Use initial conditions to determine phase and
amplitude A.
Suppose we are told x(0) 0 and x is initially
increasing (i.e., v(0) v0)
? ?/2 or -?/2 ? lt 0
? -?/2 A v0/w
So
8Initial Conditions
So we find ? -?/2 and A v0/w
9Example Initial Conditions
- A mass hanging from a vertical spring is lifted a
distance d above equilibrium and released at t
0. Which of the following describes its velocity
and acceleration as a function of time?
(a) v(t) -vmax sin(w t) a(t) -amax cos(w
t)
(b) v(t) vmax sin(w t) a(t) amax cos(w
t)
(c) v(t) vmax cos(w t) a(t) -amax cos(w
t)
(both vmax and amax are positive numbers)
10Example Solution
Since we start with the maximum
possibledisplacement at t 0 we know that
11Problem Vertical Spring
- A mass m 102 g is hung from a vertical spring.
The equilibrium position is at y 0. The mass
is then pulled down a distance d 10 cm from
equilibrium and released at t 0. The measured
period of oscillation is T 0.8 s. - What is the spring constant k?
- Write down the equations for the position,
velocity and acceleration of the mass as a
function of time. - What is the maximum velocity?
- What is the maximum acceleration?
12Problem Vertical Spring
13Problem Vertical Spring
- What are the equations of motion?
- At t 0,
- y -d -ymax
- v 0
- So we conclude
14Problem Vertical Spring
?t
0
?
??
k
y
ymax d 0.1 m vmax ?d (7.85 s-1)(0.1 m)
0.78 m/s amax ?2d (7.85 s-1)2(0.1 m) 6.2
m/s2
0
-d
m
t 0
15Review of Simple Pendulum
- Using ? I? and sin ? ? ? for small ?
?
?
I
We found
where
Which has SHM solution ? ?0 cos(? t ? )
16Review of Rod Pendulum
- Using ? I? and sin ? ? ? for small ?
We found
where
Which has SHM solution ? ?0 cos(? t ?)
17General Physical Pendulum
- Suppose we have some arbitrarily shaped solid of
mass M hung on a fixed axis, and that we know
where the CM is located and what the moment of
inertia I about the axis is. - The torque about the rotation (z) axis for small
? is (sin? ? )
z-axis
R
?
x
CM
d
Mg
where
18Example Physical Pendulum
- A pendulum is made by hanging a thin hoola-hoop
of diameter D on a small nail. - What is the angular frequency of oscillation of
the hoop for small displacements? (ICM mR2 for
a hoop)
pivot (nail)
(a) (b) (c)
D
19Example Solution
- The angular frequency of oscillation of the hoop
for small displacements will be given by
Use parallel axis theorem I Icm mR2
I mR2 mR2 2mR2
20Simple Harmonic Motion Summary
21Energy in SHM
- For both the spring and the pendulum, we can
derive the SHM solution by using energy
conservation. - The total energy (K U) of a system undergoing
SHM will always be constant!
- This is not surprising since there are only
conservative forces present, hence K U energy
is conserved.
22Energy in SHM(example mass/spring)
- Energy is conserved (a constant of the motion).
- Energy is proportional to A2.
23Recap of todays lecture
- Recap of last lecture
- Using initial conditions to solve problems
- Problem Vertical Spring
- The general physical pendulum
- Energy in SHM
- Review Chapter 14 in Tipler