CereTom Portable CT Scanner - PowerPoint PPT Presentation

1 / 5
About This Presentation
Title:

CereTom Portable CT Scanner

Description:

... pulled away from wall by a minimum of four feet, or angled away from ... Monitor all lines and equipment while CT technologist is positioning the CereTom ... – PowerPoint PPT presentation

Number of Views:308
Avg rating:3.0/5.0
Slides: 6
Provided by: BPer2
Category:

less

Transcript and Presenter's Notes

Title: CereTom Portable CT Scanner


1
CereTom Portable CT Scanner
2
Overview
  • The RN Role
  • The CT Technologist Role
  • For more information please see the Portable CT
    Protocol (attached)

3
RN RolePreparing for scan while patient is in
bed
  • After the Physician has requested the Portable CT
    exam the RN will follow this process
  • Confirm with the CT Technologist on a time for
    exam to be performed
  • Begin to prepare the patient for the exam
  • All lines, pumps and equipment should be moved to
    the side of the patient bed
  • Bed should be pulled away from wall by a minimum
    of four feet, or angled away from the wall to
    accommodate the CereTom
  • Assist the CT Technologist to position the scan
    board under the patient
  • Assist with moving the patient and the scan
    board into position at the top of the bed
  • Monitor all lines and equipment while CT
    technologist is positioning the CereTom

4
RN RolePreparing patient for scan on the scan
platform
  • For patients who must be moved from an isolete or
    crib for CT scanning
  • The RN with the assistance of the CT Technologist
    and others as needed, will move the patient to
    the scanning platform
  • All lines, pumps and other equipment will be
    monitored during this move and during the CT scan
  • The RN will assist with the positioning of the
    patient and the scan platform in the CereTom
  • Post exam the RN will assist with getting the
    patient back into their isolete or crib

5
CT Technologist Role
  • The CT Technologist after receiving the order
    from Cerner, shall communicate with the patients
    RN to confirm that the exam will be performed
    portably and the time it will be done
  • CT Technologist will bring the Portable CT
    scanner to the unit/room (scan platform if
    needed)
  • CT Tech with the assistance of the patients RN
    will move the patient onto the scan board or scan
    platform and position for the CT scan
  • CT Tech will position the scanner for the exam
  • CT Tech will place all appropriate lead shielding
    required for the exam i.e. lead shield, CT scan
    aprons and lead aprons for staff, then will
    perform the exam
  • After scan performed and patient taken off of the
    scan board or scan platform with assistance from
    the RN
Write a Comment
User Comments (0)
About PowerShow.com