Network Technologies Lab Sunday Exercises gmacrisunu.rnc.ro

1
Network Technologies Lab Sunday
Exercisesgmacri_at_sunu.rnc.ro
2
exercise 1ping command

• Use ping command
• Windows 95
• msdos prompt ping target-address
• Windows 95 application PC1 d\win95\cyber.zip
• Debian Linux
• use man command to get the parameters of ping
  command
• Cisco router (look to the exercise no. 6 and 10)
• ping command

3
exercise 2traceroute command

• Use traceroute command
• Windows 95
• msdos prompt tracert target-address
• Windows 95 application PC1 d\win95\tpwins32.zip
• Debian Linux
• use man command to get the parameters of
  traceroute command
• Cisco router (look to the exercise no. 6 and 10)
• trace command

4
exercise 3initial configuration

• serial connection from PC to cisco router console
  port
• minicom /dev/ttyS0
• power on router, watch the loading messages
• initial config dialog
• configure e0 for row ethernet and leave other
  interfaces unconfigured
• ip routing yes but no to all routing protocols
  (especially RIP!)

5
exercise 4configure ethernet interface

• telnet to the router from one of the 1E PCs in
  the row.
• routergtenable
• routerconf t
• router(config)int e0
• router(config-if)ip addr 161.53.75.xx
  255.255.255.240
• router(config-if)no shut
• router(config-if)z
• routersho ip int br

6
exercise 5 (1/2)configure static routes

• configure the router with the same static routes
• to create static routes, use the ip route
  command
• ip route net-prefix netmask nexthop
• e.g.
• routerconf t
• router(config)ip route 161.53.74.0
  255.255.255.0 161.53.75.1

7
exercise 5 (2/2)configure static routes

• now add a static default route
• the default route is represented by net prefix
  0.0.0.0 and netmask 0.0.0.0, e.g.
• ip route 0.0.0.0 0.0.0.0 161.53.75.xx
• use ping and traceroute to test
• router ping target-ip-addr
• router trace target-ip-addr

8
exercise 7 (1/2)configure passwords

• there are (at least) 6 passwords to be set
  console login password, 4 vty passwords, and the
  enable password
• set the console password
• router(config)line con 0
• router(config-line)password mysecret
• set the vty passwords
• router(config-line)line vty 0 4
• router(config-line)password mysecret
• router(config-line)exit
• set the enable password
• router(config)enable password mysecret
• router(config)Z

9
exercise 7 (2/2)configure passwords

• examine the config, note that the passwords are
  in plaintext
• show running
• ...
• enable password mysecret
• ...
• line con 0
• password mysecret
• ...
• line vty 0 4
• password mysecret
• login
• encrypt the passwords, then examine the config
  again
• router(config)service password-encryption
• router(config)Z
• routersho run

10
exercise 8configure syslogging

• configure syslogging on the PC
• edit /etc/syslog.conf, add this line
• local0.debug /var/log/cisco
• daemon syslogd to re-read its configuration file
  using ps and kill comands
• configure the router to do syslogging
• router(config)logging buffered
• router(config) logging facility local0
• router(config) logging 169.222.31.42
• some things that cause log messages
• shutting down or bringing up an interface, any
  configuration change, any debug command

11
exercise 9configure DNS resolver

• configure cisco router
• use ip name-server command
• use ip domain-name comand
• use ip domain-list command
• use administrative cisco commands
• routerping www.carnet.hr.
• routertrace www.carnet.hr.
• use other commands
• router telnet sun1.workshop.carnet.hr.