WLR Service Improvement Projects - PowerPoint PPT Presentation

1 / 10
About This Presentation
Title:

WLR Service Improvement Projects

Description:

... to commence within the ... all open orders/faults and those closed within previous 7 days. ... specialists & service managers will commence w/c 9th June. ... – PowerPoint PPT presentation

Number of Views:42
Avg rating:3.0/5.0
Slides: 11
Provided by: sharo87
Category:

less

Transcript and Presenter's Notes

Title: WLR Service Improvement Projects


1
  • WLR Service Improvement Projects
  • 10 June 2008

2
Temporary Call Diversion
  • Feedback received from CPs to advise that the
    process does not currently work well it takes
    too long to apply/remove the divert.
  • Workshop held to review the end to end process
    and formulate a plan to deliver improvements.
  • Proposed solution is to automate as much of the
    process as possible via SPG.
  • This solution will need to be trialled before
    full roll out.
  • Trial to commence within the next month.

3
Temporary Call Divert Proposed Process
CP
End User
Openreach
Change type order to be raised for Admin Call
Divert product
TCD requested
SPG
SPG
Divert should be activated/removed within 30
minutes of order placement
CP makes a call to ensue the divert has been
activated/removed
Order will be built and progressed automatically
(with the exception of ISDN2 lines which have MSN
or DDIs)
If divert has not been applied/removed, email to
be sent to SMC with subject heading 30 minute
chase
SMC to investigate cause of failure and progress
as appropriate
4
Quality Gates
  • Weekly output will be available to service
    managers from w/c 9th June and will be
    communicated via SIP update slot within service
    reviews.
  • Weekly analysis will be carried out on around 90
    of all WLR2 repeat faults.
  • Targets will be set for each of the quality gate
    owners by the end of June.
  • System development for strategic solution has
    entered the design phase.

5
Quality gates sample of output
Figures are an approximation only
6
Order Fault Tracker
  • Benefits
  • Self Service Tool, enables CP to proactively view
    underlying engineering notes and SMC notes
    relating to orders or faults reducing need to
    call the Openreach SMC
  • List view will show all open orders/faults and
    those closed within previous 7 days.
  • Orders/faults with TRC or SFI charges will be
    held on system until at minimum the next billing
    cycle has concluded.
  • Customers will be able to manage end user
    expectations more efficiently.
  • Project Progress
  • Demonstration/briefings for SMC have commenced.
    Awareness to be raised that their notes will now
    be seen by customers so acronyms, jargon etc
    should not be used.
  • Training for product specialists service
    managers will commence w/c 9th June.
  • Full rollout of training within openreach to be
    completed within 4 weeks.
  • CP rollout plan is being formulated.
  • Work ongoing to develop CP training pack via
    video.

7
Master Classes
  • First WLR class will cover the new sites process.
  • Requirement has been highlighted through analysis
    of provision failures, CP requests and reactive
    work carried out.
  • A better understanding of this process will allow
    CPs to deliver an improved service to their end
    users, managing expectations and giving accurate
    information.
  • Collateral received from new sites and work
    ongoing on SMC contribution. Pack will be
    completed by the end of the month.
  • Dates will be communicated via your service
    manager.

8
Ineffective clear and repeat fault reduction
9
Ineffective clear and repeat fault reduction
10
Introduction of 72hr retest benefits update
72 hr retest period introduced for ISDN2 and
analogue faults cleared by the SMC
Write a Comment
User Comments (0)
About PowerShow.com