MS lock Nut

1
MS LOCK NUT
Lock nuts are used to secure machine components
by preventing loosening of bearings. Lock Nuts
are used to secure gears by holding the nuts and
bolts in position. We at Shree Ji Steel strive
to provide our patrons the bet quality Lock Nuts
at most affordable prices in the market.
website https//shreejisteelcorp.com/
2
WEIGHT CHART WEIGHT CHART WEIGHT CHART WEIGHT CHART WEIGHT CHART WEIGHT CHART WEIGHT CHART
MS Lock Nut Nominal Size (in mm) Thickness Thickness Thickness Approx count per 50Kgs
MIN MAX
6 2.70 3.30 17224
8 3.62 4.38 9570
10 4.62 5.38 6221
12 6.55 7.45 3635
14 7.55 8.45 2268
16 7.55 8.45 1600
18 8.55 9.45 1205
20 8.55 9.45 723
22 9.55 10.45 592
24 9.55 10.45 398
27 11.45 12.55 275
30 11.45 12.55 192
33 13.45 14.55 140
36 13.45 14.55 110
39 15.45 16.55
website https//shreejisteelcorp.com/
3
WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART
MS Lock
Nut Nominal Size (in Thickness Width Across Flat Width Across Flat Width Across Flat
inches) BSW/BSF
MAX MIN MAX
3/16 0.267 0.319 0.324
¼ 0.321 0.435 0.445
5/16 0.378 0.515 0.525
7/16 0.528 0.695 0.710
½ 0.593 0.800 0.820
5/8 0.722 0.985 1.010
¾ 0.960 1.175 1.200
7/8 1.012 1.270 1.300
1 1.113 1.45 1.480
website https//shreejisteelcorp.com/
4
WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART WIDTH CHART
MS Lock Nut
Nominal Size (in Thickness Width Across Flat Width Across Flat Width Across Flat
inches) UNC/UNF
MAX MIN MAX
No.8 0.239 0.319 0.374
No.10 0.249 0.319 0.410
No.12 0.328 0.319 0.482
1/4 0.328 0.435 0.482
5/16 0.359 0.515 0.552
3/8 0.468 0.585 0.622
7/16 0.468 0.695 0.698
1/2 0.609 0.800 0.837
9/16 0.656 0.800 0.978
5/8 0.765 0.985 1.051
¾ 0.890 1.175 1.191
7/8 0.999 1.270 1.403
1 1.078 1.450 1.615
website https//shreejisteelcorp.com/