Passleader 400-101 Braindumps

1
Cisco 400-101 CCIE Routing and Switching (v5.1)
2
Passleaders is the leading brand of 400-101
Braindumps. We will provide you latest updated
Test Engine and PDF Dumps. Passleaders provide
you some free demo questions and answers.
Practicing our 100 updated 400-101 Practice
Tests is a guaranteed way towards your success in
Cisco 400-101 Exam.
Passleader 400-101 Exam Questions
Passleader 400-101 Practice Test
3
Did You Know!
Passleader 400-101 Exam Questions
Passleader 400-101 Practice Test
4
You Dont need to take any stress for the
preparation of 400-101 Exam Questions because we
will provide you real Exam questions answers,
Passleaders provide you some demo question answer
of 400-101 Braindumps.
Passleader 400-101 Exam Questions
Passleader 400-101 Practice Test
5

• QUESTION 1,
• You boot a router that contains an RXBOOT image
  and no startup configuration file. After a few
  moments, streamlined Setup mode begins. Which of
  the following will you be prompted to configure?
  (Select the best answer.)
• the host name
• the VTY password
• the enable secret password
• interface parameters
• Correct Answer D

www.passleaders.com/400-101-exam.html
6

• QUESTION 2,
• You issue the aaa authentication login default
  group tacacs local command. Which of the
  following statements is correct? (Select the best
  answer.)
• If a user's account is not found on the TACACS
  servers, the user will automatically be allowed
  access.
• If the TACACS servers are unavailable the user
  will automatically be allowed access.
• If the TACACS servers are unavailable the user
  will automatically be denied access.
• The default authentication method is applied to
  all lines for which no other login method has
  been specified.
• Correct Answer D

www.passleaders.com/400-101-exam.html
7

• QUESTION 3,
• Which of the following OSPF LSAs are also called
  ASBR summary LSAs? (Select the best answer.)
• Type 1 LSAs
• Type 2 LSAs
• Type 3 LSAs
• Type 4 LSAsE E. Type 5 LSAs
• Correct Answer D

www.passleaders.com/400-101-exam.html
8

• QUESTION 4,
• Which of the following statements are true when
  an RSTP switch detects a topology change? (Select
  2 choices.)
• It starts the TC While timer with a value equal
  to the hello timer for all its non-edge
  designated ports and its root port.
• It starts the TC While timer with a value equal
  to twice the hello timer for all its non-edge
  designated ports and its root port.
• It starts the TC While timer with a value equal
  to three times the hello timer for all its
  non-edge designated ports and its root port.
• It flushes the MAC addresses associated with its
  edge designated ports and its root port from the
  CAM table. E. It flushes the MAC addresses
  associated with its non-edge designated ports and
  its root port from the CAM table.
• Correct Answer BE

www.passleaders.com/400-101-exam.html
9

• QUESTION 5,
• Which of the following command sets will cause an
  EEM applet to finish before the show
  runningconfig command is executed? (Select the
  best answer.)
• Router(config)event manager applet boson
  Router(configapplet)event cli pattern "show
  runningconfig" sync no skip no Router(configapplet
  )action 1.0 syslog msg "Running configuration
  displayed"
• Router(config)event manager applet boson
  Router(configapplet)event cli pattern "show
  runningconfig" sync no skip yes
  Router(configapplet)action 1.0 syslog msg
  "Running configuration displayed"
• Router(config)event manager applet boson
  Router(configapplet)event cli pattern "show
  runningconfig" sync yes Router(configapplet)actio
  n 1.0 syslog msg "Running configuration
  displayed" Router(configapplet)set 2.0
  _exit_status 0
• Router(config)event manager applet boson
  Router(configapplet)event cli pattern "show
  runningconfig" sync yes
• Router(configapplet)action 1.0 syslog msg
  "Running configuration displayed"
  Router(configapplet)set 2.0 _exit_status 1
• Correct Answer D

www.passleaders.com/400-101-exam.html
10

• QUESTION 6,
• Which of the following commands will track
  whether IP routing is enabled, the interface line
  protocol is up, and the interface IP address is
  configured? (Select the best answer.)
• track 1 interface FastEthernet1/1 lineprotocol
• track 1 interface FastEthernet1/1 ip routing
• track 1 ip route 10.10.10.0/24 reachability
• track 1 ip route 10.10.10.0/24 metric threshold
• Correct Answer B

www.passleaders.com/400-101-exam.html
11

• QUESTION 7,
• Which of the following NetFlow features is not
  unique to version 9 and later? (Select the best
  answer.)
• template-based export protocol
• support for IPv6 flows
• C. support for MPLS flows
• D. support for multicast flows
• E. support for router-based aggregation
• Correct Answer E

www.passleaders.com/400-101-exam.html
12

• QUESTION 8,
• Your company has configured STP with the timers
  set to their default values. For what duration
  will the TC bit be set by the root bridge after
  it receives a TCN BPDU? (Select the best answer.)
  
• two seconds
• 15 seconds
• 20 seconds
• 35 seconds
• Correct Answer D

www.passleaders.com/400-101-exam.html
13

• QUESTION 9,
• RouterA and RouterB are connected by their Serial
  0/0 interfaces. You are able to successfully ping
  from one router to the other? however, the
  routers are not establishing an OSPF neighbor
  relationship. You issue the debug ip ospf hello
  command on each router and notice that RouterA is
  sending hello packets but not receiving them.
• Which of the following statements best describes
  why the routers are unable to form a neighbor
  relationship? (Select the best answer.)
• RouterA should be configured as the DR.
• RouterB should be configured as the DR.
• The Serial 0/0 interface of RouterA is configured
  as a passive interface.
• The Serial 0/0 interface of RouterB is configured
  as a passive interface.
• RouterA and RouterB are configured with different
  OSPF process IDs.
• RouterA and RouterB are configured with different
  hello timer or dead timer intervals.
• Correct Answer D

www.passleaders.com/400-101-exam.html
14

• QUESTION 10,
• Which of the following routes cannot be
  redistributed into a dynamic routing protocol?
  (Select 2 choices.)
• C 192.168.1.0/30 is directly connected,
  Ethernet0/0
• C 192.168.1.1/32 is directly connected, Loopback0
  
• L 192.168.1.1/32 is directly connected,
  Ethernet0/0
• C 20011234/64 0/0 E. L 200112341/128
  0/0
• LC 200112341/128 0/0
• Correct Answer CE

www.passleaders.com/400-101-exam.html
15
WHY CHOOSE US!
Offering Effective PDF Tests Training to
Individuals and Companies
100 Money Back Guarantee on All Dumps
Special Student Discount Available
Printable and Searchable PDF Braindumps
User Interactive Exams Software
Passleader 400-101 Exam Questions
Passleader 400-101 Practice Test
16
Passleader 400-101 Exam Questions
Passleader 400-101 Practice Test
17
Good luck
Passleaders provides you guaranteed success in
400-101 Dumps as we have latest 400-101 Exam
Dumps. Click Here following link to download
400-101 Braindumps.
Passleader 400-101 Exam Questions
Passleader 400-101 Practice Test