Ceat Tyres: Know the common causes for wear

1
Ceat Tyres Know the common causes for wear
It is crucial for vehicle owners to make sure
that they check it thoroughly for wear and tear
of the different parts fitted in it. Not
following this routine, will only mean the
vehicle getting stalled or damaged or even
meet unfortunate accidents at any point of time.
One such part that should be checked every now
and then and the worn out part replaced
immediately is the tyre. Using ceat tyre
for the vehicle is a wise decision. Need for
good quality car tyre The tyres are regarded
to be the only contact point between the
road and
the vehicle. Any damage caused to its sidewalls
or deterioration of tread will
2

• only mean unfortunate accidents. Hence, it
  becomes essential for the owner to replace the
  worn out part with superior quality ceat tyres.
• Basic legal requirements to be followed for car
  tyres
• Tread depth to be at least 1.6mm
  It applies to whole tyres circumference.
  If the wheel has a bald patch in it, where tread
  depth is found to be below the legal
  requirements should be avoided. It has to
  be checked after emergency braking or skid,
  as it might cause bald patches.
• Inflation to correct pressure The
  manufacturers handbook is to be gone through
  to know the recommended pressure in it.
  It helps to reduce fuel consumption and vehicle
  handling.
• Compatible and in the best driving
  condition All four tyres of the vehicle are
  to be replaced, so that the vehicle is in
  good shape and running condition.

• Some factors affecting tyre wear rate
• Make The fact is every wheel is designed
  to meet certain criteria.

Tough rubber compound is used to create
long life tyres. It increases
3

• noise while driving. However, soft compound
  will be much quieter, but wear out quickly.
• Position Front ones tend to wear out much
  faster when compared to back ones. This is
  more so for front wheel drive vehicles. Extra
  wear is due to steering movement. Front
  tyres of 4 wheel drive are to exceed
  20,000 miles. Hence, it is half of the back
  tyres expected life.
• Vehicle weight tyres tend to wear-out faster in
  heavier vehicles.
• Correct pressure If inflated below
  recommended pressure, then the tyre is sure
  to wear faster due to extra rubber flexing
  and higher operating temperature. Over
  inflation also can increase wear because of
  decreased contact area size between the road and
  the tyre.
• Speed Moving at high speeds will increase tyre
  temperature.
• tyre alignment Increased, uneven wear will
  be experienced due to incorrect alignment.
• Driving style Excessive braking,
  accelerating and aggressive cornering are
  known to cause tyre depletion.

Knowing the above factors can help the
person to maintain his vehicles wheels. One
can get huge discounts on online ceat tyre price.
Conclusion There are several reasons for
tyres to deplete. Knowing the reasons can
help to take care of it and use for a long time.