MSHARP to OOMA NALCOMIS Transfer Procedures

1
M-SHARP to OOMA NALCOMIS Transfer Procedures
2
Introduction to M-SHARP to NALCOMIS Transfer

• The use of external transfer devices (e.g. thumb
  drives) has become more restrictive due to
  Operational Security (OPSEC).
• The A drive is the only input option into OOMA
• This brief provides instructions on several
  methods used to perform the M-SHARP to OMMA
  transfer.
• OOMA only allows for the transfer of one flight
  at a time from M-SHARP via the SHARP/FIST
  interface (A drive).
• At the end of every transfer, the user must
  delete the old files on the A drive, in
  preparation for the next transfer. The A
  drive must be empty before starting the next
  transfer.

Click here to read the MARADMIN 647/08
3
Media Transfer Options

• There are four options available to transfer data
  from M-SHARP to OOMA,
• Mapped Shared Folder
• CD-RW
• USB, External HD, or Network Drive
• Floppy Drive
• (Bolded options are highly recommended)

4
Media Transfer Options

• These Media Options are Normally Used When the
  Unit is Deployed(i.e. Deployable M-SHARP)
• Floppy Drive
• CD-RW
• M-SHARP and NALCOMIS Do Not Coexist on the Same
  Network

5
Media Transfer Options

• These Media Options are Normally Used When the
  Unit is at Home Base(i.e. Global M-SHARP)
• USB, External HD, or Network Drive
• Mapped Shared Folder
• M-SHARP and NALCOMIS Coexist on the Same Network

6
Media Transfer Options
Click on the Desired Media Type Below, to Advance
to that Media Types Procedures
Floppy Drive
CD-RW
USB, External HD, or Network Drive
Mapped Shared Folder