Biomedical Engineering Division - PowerPoint PPT Presentation

1 / 32
About This Presentation
Title:

Biomedical Engineering Division

Description:

THE CHINESE UNIVERSITY OF HONG KONG. Department of Electronic ... Electrocardiogram. Low Frequency. 0.05 ~ 100Hz. Low Voltage. 0.5 ~ 5mV. Signal Detection ... – PowerPoint PPT presentation

Number of Views:244
Avg rating:3.0/5.0
Slides: 33
Provided by: bme4
Category:

less

Transcript and Presenter's Notes

Title: Biomedical Engineering Division


1
Biomedical Engineering Division
Presentation on Final Year Project
  • Prepared by Chu
  • Date 990324

2
THE CHINESE UNIVERSITY OF HONG KONG Department
of Electronic EngineeringERG4920B -Thesis II
Project Seminar
Student Chu Wing LeungSupervisor Prof. Y. T.
ZhangCo-examiner Prof. F. Y. Chang
3
Telemedicine
  • Use of advanced telecommunication technologies
    to remotely deliver medical services

Telemetry System !
4
Telemetry System
  • A group project including 3 parts
  • Data Acquisition Unit (Chu Wing Leung)
  • Infra Red Communication Unit (Yuen Ka Fai)
  • Medical Data Network (Au Yeung Kin Lung)

5
Overview of Telemetry System
  • Data Acquisition Unit (DAU)
  • pick up biological signals from human body
  • Infra Red Communication Unit (IrCU)
  • transmit data by wireless IR link
  • Medical Data Network (MDN)
  • transfer received medical data to the network

6
Presentation Flow
  • Data Acquisition Unit (W. L. Chu)
  • Infra Red Communication Unit (K. F. Yuen)
  • Medical Data Network (K.L. Au Yeung)
  • Demonstration (all)
  • Q A Section (all)

7
Project TitleTelemetry System -Data
Acquisition Unit
Biological Signal (e.g. ECG)
8
Objective
  • To design and make a
  • Data Acquisition Unit or
  • so called theFront-End Circuit
  • for a Biomedical Telemetry System

To perform 3 main functions 1. detect and
amplify the biological signals 2. covert the
signals into digital data 3. transmit data
through the microprocessor
9
Data Acquisition Unit
Implementation of Front-end Circuit 1. Signal
Detection 2. Signal Amplification 3. Signal
Conversion Data Collection 4. Data Transmission
10
1. Signal Detection
  • Signal ?
  • Aiming to detect ECG
  • Electrodes ?
  • Use Body-surface Monitoring Electrode
  • Lead Connection ?
  • Use Lead I connection

11
What is ECG? ? Electrocardiogram
Signal Detection
  • Low Frequency
  • 0.05 100Hz
  • Low Voltage
  • 0.5 5mV

12
Signal Detection
  • Basic Elements of an Electrode
  • Metal Plate with Electrode Gel
  • Adhesive Tape
  • Plastic Capsule for connection
  • Wire (Thin Flexible Coaxial Cable)

13
Signal Detection
  • Monitoring Electrode
  • with Foam Tape and Solid Gel
  • Easy to use
  • Improve accuracy of monitoring
  • Coaxial Cable with Plug-in Jack
  • Against 50 Hz pick-up
  • Secure Connection

14
Signal Detection
Lead I Connection
  • Three electrodes connected to
  • Right Arm, Left Arm
  • and Right Leg (as a Ref. GND)

15
Signal Detection
  • For more advanced ECG detection (12-Lead
    Diagnosis)
  • Electrode Contact to different chest positions

16
2. Signal Amplification
  • ECG Amplifer Specifications
  • High Gain
  • High Input Impedance
  • Good Common-mode Rejection

17
Instrumental Amplifier by Single Chip INA118
Signal Amplification
  • FEATURES
  • LOW OFFSET VOLTAGE
  • LOW DRIFT
  • LOW INPUT CURRENT
  • HIGH CMRR
  • ADJUSTABLE GAIN

18
Signal Amplification
  • Safety Concern Right Leg Driven Circuitry

1. In case of electrical sock, isolation
between the patient and ground 2. Reduction in
Common Mode Voltage
19
Signal Amplification
  • Stages of Signal Conditioning

Filter out DC offset and EMG signal
Pick up signal
Tunable Amplification
20
3. Signal Conversion Data Collection
  • Analog-to-Digital Converter (ADC0801)
  • 8-bit resolution
  • 1 MHz Sampling Rate
  • Assembly Programming in Microprocessor for Data
    Collection
  • Multi-tasking Ability
  • Control ADC and Data Transmission

21
Block Diagram of Hardware Interface
22
Circuit Diagrams
23
4. Data Transmission
  • Digital signals are transmitted through the IR
    data link
  • Send by RS232 protocol
  • IR RX Connected to COM port
  • Visual Basic Program to recovery the signal by
    software D/A conversion

24
What have we done?
25
Prototyping
  • Transmitter (Original Model)

26
Prototyping
Packaging Design - Transmitter
Front View
Side View
27
Prototyping
Transmitter (Latest Version)
28
Prototyping
Packaging - Receiver
  • Front View

Back View
29
Prototyping
  • Receiver

30
Further Development
  • Improvement on Prototype
  • Miniature, Small in Size Portable
  • Low Power Operation
  • Increase of Signal Channels
  • Multi-Channel ADC with TDMA method
  • Plug-in Device with Isolation
  • Direct connection to the computer

31
Acknowledgements
  • Thanks for advice from
  • Prof Y. T. Zhang
  • Prof F. Y. Chang, FIEEE
  • Mr S. M. Chu
  • Mr Brian S.W. Leung

32
Thank you!
End of Presentation
Write a Comment
User Comments (0)
About PowerShow.com