Buy Arduino Microcontroller by Robomart India

About This Presentation
Title:

Buy Arduino Microcontroller by Robomart India

Description:

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital input/output pins, 6 analog inputs, A 16 MHz ceramic resonator, A USB connection, A power jack, An ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. – PowerPoint PPT presentation

Number of Views:103

less

Transcript and Presenter's Notes

Title: Buy Arduino Microcontroller by Robomart India


1
arduino Microcontroller
 
 
RM0058
  • By

2
Introduction of Arduino Robotic kit
  • The Arduino Uno is a microcontroller board based
    on the ATmega328 ."Uno" means one in Italian and
    is named to mark the upcoming release of Arduino
    1.0.
  • It has 14 digital input/output pins, 6 analog
    inputs, A16 MHz ceramic resonator, A USB
    connection, A power jack, An ICSP header and a
    reset button.
  • It contains everything needed to support the
    microcontroller simply connect it to a computer
    with a USB cable or power it with a AC-to-DC
    adapter or battery to get started.
  • The Uno differs from all preceding boards in that
    it does not use the FTDI USB-to-serial driver
    chip. Instead, it features the Atmega16U2Atmega8U2
    up to version R2) programmed as a USB-to-serial
    converter.
  • The Arduino UNO can be powered via the USB
    connection or with an external power supply. The
    power source is selected automatically. 

3
Pin out of Arduino Uno
RM0058
4
Features of Arduino Robotic kit
  • Microcontroller
    ATmega328
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Digital I/O Pins 14
    (of which 6 provide PWM output)
  • Analog Input Pins 6
  • DC Current per I/O Pin 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 32 KB of
    which 0.5 KB used by boot loader
  • SRAM 2 KB
  • EEPROM 1 KB
  • Clock Speed 16 MHz

5
Applications of Arduino Microcontroller
  • DIY project prototyping.
  • Developing varied varieties of projects that
    require a code based control.
  • Automation System development.
  • Learning AVR programming.
  • Entry level circuit designing.

RM0058
6
Contact Us
B5 C Block Sector 31, Above Indian Overseas
Bank Noida Uttar Pradesh 201301 India
Mob. 91-8744000555 Tel. 91-120- 4317229
Email ID admin_at_robomart.com Web.
https//www.robomart.com
7
Thank You
Write a Comment
User Comments (0)