Cisco 200-120 CCNA Braindumps

1
200-120 CCNA

• Cisco Certified Network Associate Exam

2
Exam Description

• CCNA Composite Exam The 200-120 CCNAX is the
  composite exam associated with the Cisco CCNA
  Routing and Switching certification. Candidates
  can prepare for this exam by taking the
  Interconnecting Cisco Networking Devices
  Accelerated (CCNAX) course. This exam tests a
  candidate's knowledge and skills required to
  install, operate, and troubleshoot a small to
  medium size enterprise branch network. The topics
  include all the areas covered under ICND 1 and
  ICND2 Exams.

3
Exam 200-120 Information
4
Recommended Training 200-120
Interconnecting Cisco Networking Devices
Accelerated (CCNAX) Courses listed are offered by
Cisco Learning Partners-the only authorized
source for Cisco IT training delivered
exclusively by Certified Cisco Instructors. Check
the List of Learning Partners for a Cisco
Learning Partner nearest you
5
Certification Exam Policies
CCNP Routing and Switching Official Certification
Library is a comprehensive review and practice
package for the three CCNP Routing and Switching
exams ROUTE, SWITCH, and TSHOOT. The three books
contained in this package, CCNP ROUTE 642-902
Official Certification Guide, CCNP SWITCH 642-813
Official Certification Guide, and CCNP TSHOOT
642-832 Official Certification Guide, present
complete reviews and ample opportunity to test
your knowledge of CCNP Routing and Switching exam
topics. These authorized CCNP Routing and
Switching study guides are written by CCIE
certified experts, bringing years of teaching and
consulting experience together in an ideal test
preparation format. CCNP ROUTE 200-120 Official
Certification Guide teaches you how to use
advanced IP addressing and routing to implement
enterprise-level router networks connected to
LANs and WANs. CCNP SWITCH 200-120 Official
Certification Guide ensures that you have the
skills necessary to implement scalable,
multilayer switched networks. CCNP TSHOOT 200-120
Official Certification Guide helps you master the
troubleshooting methodologies, tools, and tasks
needed to effectively monitor and maintain large
enterprise networks.
6
Current Exams
In 2014, Cisco announced the Implementing Cisco
IP Routing (ROUTE), Implementing Cisco IP
Switched Networks (SWITCH) and Troubleshooting
and Maintaining Cisco IP Networks (TSHOOT)
courses have been updated to v2.0, providing
learners with more current and forward looking
educational topics, emphasizing IPv6, Cisco
StackWise, Virtual Switching Services (VSS) and
Dynamic Multipoint VPN (DMVPN).
7
37 Results for "200-120" in Products

• Cisco CCNA Routing and Switching 200-120 Network
  Simulator helps students in the classroom develop
  and improve hands-on configuration and
  troubleshooting skills without the investment in
  expensive lab hardware. This state-of-the-art,
  interactive simulation software enables you to
  practice your networking skills with almost 400
  structured labs designed to help you learn by
  doing, the most effective method of learning. 

8
CCNP SP Study Material
9
Complete Practice Exam
10
Download Our 200-120 Free PDF Demo
11
Cisco 200-120 Practice Test

• Topic 2, LAN Switching Technologies

Question 1 (Topic 2)
Which are valid modes for a switch port used as a
VLAN trunk? (Choose three.) A. transparent B.
auto C. on D. desirable E. blocking F. forwarding
Answer
auto on desirable
12
Cisco 200-120 Practice Test
IP addressing (IPv4 / IPv6)
Question 2 (Topic 3)

• Which IPv6 address is the all-router multicast
  group?
• A. FF021
• B. FF022
• C. FF023
• D. FF024

Answer
FF022
13
Cisco 200-120 Practice Test
Question 3 (Topic 3)

• Which of these represents an IPv6 link-local
  address?
• A. FE80380e611ae14f3d69
• B. FE81280f512be14f3d69
• C. FEFE03455f1be14d3d69
• D. FE08280e611af14f3d69

Answer
FE80380e611ae14f3d69
14
Cisco 200-120 Practice Test
Question 4 (Topic 3)

• What is the alternative notation for the IPv6
  address
• B51482C3000000000029EC7A0000EC72?
• A. B514 82C3 0029 EC7A EC72
• B. B514 82C3 0029 EC7A EC72
• C. B514 82C3 0029 EC7A 0000 EC72
• D. B514 82C3 0029 EC7A 0 EC72

Answer
B514 82C3 0029 EC7A 0 EC72
15
Cisco 200-120 Practice Test
Topic 4, IP Routing Technologies
Question 5 (Topic 4)

• Refer to the exhibit.

Why is flash memory erased prior to upgrading the
IOS image from the TFTP server? A. The router
cannot verify that the Cisco IOS image currently
in flash is valid. B. Flash memory on Cisco
routers can contain only a single IOS image. C.
Erasing current flash content is requested during
the copy dialog. D. In order for the router to
use the new image as the default, it must be the
only IOS image in flash.
Erasing current flash content is requested
during the copy dialog.
Answer
16
Cisco 200-120 Practice Test
Question 6 (Topic 4)

• Refer to the exhibit.

The speed of all serial links is E1 and the speed
of all Ethernet links is 100 Mb/s. A static
route will be established on the Manchester
router to direct traffic toward the Internet
over the most direct path available. What
configuration on the Manchester router will
establish aroute toward the Internet for traffic
that originates from workstations on the
Manchester LAN? A. ip route 0.0.0.0
255.255.255.0 172.16.100.2 B. ip route 0.0.0.0
0.0.0.0 128.107.1.1 C. ip route 0.0.0.0
255.255.255.252 128.107.1.1 D. ip route 0.0.0.0
0.0.0.0 172.16.100.1 E. ip route 0.0.0.0 0.0.0.0
172.16.100.2 F. ip route 0.0.0.0 255.255.255.255
172.16.100.2
Answer
ip route 0.0.0.0 255.255.255.255 172.16.100.2
17
Cisco 200-120 Practice Test
Topic 6, Network Device Security
Question 7 (Topic 6)
Refer to the exhibit.
A junior network administrator was given the task
of configuring port security on SwitchA to allow
only PC_A to access the switched network through
port fa0/1. If any other device is detected, the
port is to drop frames from this device. The
administrator configured the interface and tested
it with successful pings from PC_A to RouterA,
and then observes the output from these two show
commands. Which two of these changes are
necessary for SwitchA to meet the requirements?
(Choose two.) A. Port security needs to be
globally enabled. B. Port security needs to be
enabled on the interface. C. Port security needs
to be configured to shut down the interface in
the event of a violation. D. Port security needs
to be configured to allow only one learned MAC
address. E. Port security interface counters need
to be cleared before using the show command. F.
The port security configuration needs to be saved
to NVRAM before it can become active.
Port security needs to be enabled on the
interface. Port security needs to be configured
to allow only one learned MAC address.
Answer
18
Cisco 200-120 Practice Test
Topic 7, Troubleshooting
Question 8(Topic 7)
19
Cisco 200-120 Practice Test
Topic 7, Troubleshooting
Question 8 (Topic 7)
20
Cisco 200-120 Practice Test
Topic 7, Troubleshooting
Question 8 (Topic 7)
21
Cisco 200-120 Practice Test
Topic 7, Troubleshooting
Question 8 (Topic 7)
22
Cisco 200-120 Practice Test
Topic 7, Troubleshootingc
Question 8 (Topic 7)
23
Cisco 200-120 Practice Test
Topic 7, Troubleshootingc
Question 8 (Topic 7)
What would be the effect of Issuing the command
ip access-group 115 in on the s0/0/1
interface? A. Telnet and ping would work but
routing updates would fail. B. FTP, FTP-DATA,
echo, and www would work but telnet would
fail. C. Only traffic from the 10.4.4.0 network
would pass through the interface.
Answer
Telnet and ping would work but routing updates
would fail.
24
Cisco 200-120 Practice Test
Topic 8, WAN Technologies
Question 9 (Topic 8)
Users have been complaining that their Frame
Relay connection to the corporate site is very
slow. The network administrator suspects that
the link is overloaded.
Based on the partial output of the Router show
frame relay pvc command shown in the graphic,
which output value indicates to the local router
that traffic sent to the corporate site is
experiencing congestion? A. DLCI 100 B. last
time PVC status changed 002540 C. in BECN
packets 192 D. in FECN packets 147 E. in DE
packets 0
in BECN packets 192
Answer
25
Topic 9, Mix Questions Set
Cisco 200-120 Practice Test
Question10 (Topic 9)

• What are three benefits of GLBP? (Choose three.)
• A. GLBP supports up to eight virtual forwarders
  per GLBP group.
• B. GLBP supports clear text and MD5 password
  authentication between GLBP group members.
• C. GLBP is an open source standardized protocol
  that can be used with multiple vendors.
• D. GLBP supports up to 1024 virtual routers.
• E. GLBP can load share traffic across a maximum
  of four routers.
• F. GLBP elects two AVGs and two standby AVGs for
  redundancy.

Answer
GLBP supports clear text and MD5 password
authentication between GLBP group members. GLBP
supports up to 1024 virtual routers. GLBP elects
two AVGs and two standby AVGs for redundancy.
26
Cisco 200-120 Feature
27
Amazing Discount for Regular Customers
28
Buy 200-120 Exam

• Don't waste your time and Buy Exam from
  Testinsides.com

For
And
29
Choose Best Testinsides Training Material

• Due to the significance of Cisco CCNA Routing and
  Switching 200-120 Exam
• Guaranteed Success in Your 200-120 CCNA Cisco
  Certified Network Associate
• CCNA Exam in your 1st Attempt
• Downloadable PDF Cisco 200-120 Version
• Authentic Answers investigated by Our dedicated
  Industry Experts
• You can actually experience as if you are in
  examination Hall taking the exam
• Practice Test Questions combined with exact Dumps
  exhibits
• Interactive "Testing Engine" available for Cisco
  CCNA Routing and Switching 200-120,
• 100 MONEY BACK GUARANTEE.

30
Become Certified from Testinsides