PARA BOW New Technique for Setting Whipstock Plugs

1
(No Transcript)
2
PARA BOWTMNew Technique for Setting Whipstock
Plugs

• BJ Services

3
Benefits of the Para BowTM

• Eliminates the need for the Diverter Tool and
  Viscose Pill
• Reduces Mud Contamination
• One Connection Hook-up
• Fully Drillable with PDC Bit
• One Ball Drop Operation
• Two Sizes Available
• Regular ParaBow -Hole Sizes from 5 to 20
• ParaBow Mark III - Hole Sizes from 2.4 to 9

4
Ideal vs. Typical Plug Placement
Mud
Mud
Mud
Cement
Cement
Ideal
Typical
Para Bow
5
Slurry Placement with Para BowTM Tool

• Check and Attach Tool to Workstring
• Run String to Desired Depth
• Condition Mud and Clean Hole
• Drop Ball and Apply Pressure to Extrude the Para
  Bow
• Pump Spacer and Cement Slurry
• Pull Out of Hole (Slowly)

6
Operation of the Para BowTM
7
Para BowTM Operation
Circulating Ball to Seat
Extruding Activator Piston (circulation is
shut-off)
Extruding Ball Seat
Extruding Parabow
Expanding Parabow
Conditioning Hole for Cement Plug
8
Para BowTM - Extrusion
Activator Piston
Extrusion Piston
Para Bow
Outer Mandrill

2 7/8 EUE Thread
Lower Piston
Upper Circulating Ports
Lower Circulating Ports
The Extrusion Tool for the ParaBow Mark III has
A OD of 2.125
9
Para BowTM Technical Data Regular Para Bow Tool

• Max. O.D. 4
• Min I.D. 2.25
• Length 79
• Weight 100 lbs
• Extrusion Pressure 580 psi

• Connection 2 7/8 EUE
• Activator Ball 2.25
• Temperature Rating 300F
• Diverter Tool Included

10
Para BowTM Technical Data ParaBow Mark III

• Max. O.D. 2.125
• Min I.D. 1.76
• Length 49.68
• Activation Pressure 1000 psi

• Extrusion Pressure 1800 psi
• Connection 1.7 - 10 SA Nowsco Thd.
• Activator Ball 0.625
• Temperature Rating 300F

11
Para BowTM Success

• Getting a Kick-Off Plug on the First Try has
  been Successful 95 of the Time When the Para Bow
  has been Used.

12
Thank You!Questions?
13
(No Transcript)