Title: Introduction to the Gann Grids Ultra 5.0 Software!
1Introduction to the Gann Grids Ultra 5.0 Software!
2What is the Gann Grids Ultra Software?
- Gann Grids Ultra is a brand new research based
software that has taken me well over to 5 years
to develop. It not only allow the user to draw
most stocks commodities or indexes of his/her
choice on a large number of harmonically perfect
grid chart sizes just as WD Gann did by hand, but
also has a variety of other Gann, Bayer and
Elliot type research applications not found
within any other software at this time! - Based on the masters methods many also believe it
is by far one of the most complete research
products on the market for the price. - However, although the software was built with the
masters methods in mind by no means is it
exclusive to them. - Our software also has a variety of other unique
applications personally tested and developed by
us at Pivot Point Research.
3 Why did I Choose Gann, Bayer and Elliot?
- In the early part of 1993 I became interested in
becoming a technical research specialist and
sought as much information as I could on the
subject. I read as many books and courses while
at the same time testing dozens of technical
forecasting systems . - Unfortunately I began to realize most if not all
fell short in actual trading results - However, around the end of my first years
research I began to see the names of W D Gann, R
N Elliot, and George Bayer as they stood out
among the rest as being the best of the best
within this fascinating field of technical
analysis and forecasting. - What intrigued me the most about these 3 men was
each had a larger then life bio along with having
an astonishing track record of forecasting market
turns weeks if not months in advance documented!
4WD Gann
- Gann spoke freely about many natural and
interesting laws such as the law of vibrations,
the law of geometrical angles, range divisions,
time cycles, and natural time, followed by an
introduction to his master calculators. - He also had a unique understanding of astronomy
in relation to market movements as explained in
various examples along with giving many other
unique astronomical calculations. - According to him the planets did in fact have a
direct effect on our markets price and time
movements. However he also felt the similarities
could only be found when understood and
researched correctly along with using the proper
tools.
5 George Bayer
- Bayer spoke of Hebrew letters, graphical
ellipses on specially sized chart paper, large
amounts of astronomical observations on what he
felt were keys to unlocking most markets price
and time reversal periods. - Aspect timing using the planets and Hot zodiac
degrees locations. - Theory behind solar and lunar eclipses in
forecasting as well as something he called his 5
fold horoscope. - Bayer also wrote several study guides and courses
based on his unique methods.
6 George Bayer
- He also felt many ancient metaphysical texts were
filled with hidden secrets of natural time cycles
as was expressed throughout his various works. - Bayer also stated THIS was the origin of his
unique research and astronomical trading tool
applications.
7 Gann and Bayer Together
- It became clear that to me that their combined
views of astronomy and natural law were more of a
hard factual science that could be back tested
and confirmed, rather then just chart
interpretations of pending doom and gloom. - Each astrological forecasting technique was more
of an astronomical method with straight forward
rules rather then what would be given from most
street corner astrologers both around at that
time or even today. - I was intrigued!
8RN Elliot
- R N Elliot believed his unique research based on
a natural coincidence of a special number cycle
was consistent with not just the fluctuations of
our universal markets but were also tied directly
into nature herself. - He found the Fibonacci sequence, the golden ratio
and a distinct number pattern found within his
pyramid research were all around him all the
time. - He discovered the sacred sequences of numbers in
plant growth, natural growth patterns, sea shell
spirals, vortex spirals, planet rotation cycles,
sacred architectural geometry, and galactic
progressions.
9 Overview of Gann Grid Ultras Basic Versions
Applications
- The Gann square tool with user defined settings
(draw any number square he or she likes!) - Time bar count tool
- Price bar count tool
- AB range division settings (used for price and
time) - Square of 9 square root angle tool
- User defined angle application
- Time cycle research tool
- Fibonacci overlay
- Numerical square overlay
- User defined price scale setting
- User defined grid size setting
- Ganns Master cycle tool
- As well as a Time progression and date calculator
application
10 Benefits of Owning the New Gann Grids Ultra
Software.
- First, being able to change the price scale
setting is one of the most important features
within our softwares functions. - I feel finding the proper price scale vibration
can only be found by changing the price scale
setting multiple times in order to locate the
best possible fit for each tool. - Second, being able to view on screen most of the
masters methods may help uncover many of their
hidden secrets. - Third, no more hand drawing the price and time
charts as each chart can now be viewed on
screen with the simple click of a button! - Fourth, Days, Weeks or even Months of advanced
cycle research can now be done in just minutes
with this New, improved and impressive version of
Gann Grids.
11The Gann Square Tool
- Gann believed his unique squares (with and
without star) should be used for both price and
time research. - How
- 1st, By using it to research time divisions from
the Gann numerical squares of 52, 90, 144 and
others. - 2nd, To research time divisions from major high
price, low price and time range swings. - And 3rd, Its used to help identify the proper
price scale vibration of the stock commodity or
index being researched.
12HET Monthly Chart set at .50 on a 144 Overlay
Starting on 10/98 Low
13Weekly Divisions of 8 from the Top to Bottom Time
Range of 38 Squared
14Division of 8 from the Bottom to Top Range of 26
Squared
15Division of 8 from the Square of 37 Bottom to
Bottom Range
16US Steel Weekly set at 1 on a Square of 90 With
Star
17SP 500 Daily set at 3.25 with Multiple Squares
of 90
18 Gann's Square of 90 once proper
Price Scale Vibration is Found
19GE Weekly Chart set at .25 using 5 Squares of
90 with Star!
20Time Bar Count Tool
- The concept behind this tool is simple, when
enough time period are counted from all major and
minor Tops to Bottoms, Bottoms to Tops, Bottoms
to Bottoms, and from all Tops to Tops then
researched on Monthly, Weekly and Daily charts
you will be able to get a general feel for
approximately when the next cycle period should
end or begin.
21GE Monthly Top to Top Time Period Counts of 4-5
8-10 Bars
22Bottom to Bottom Time Counts of 4-6 8-10 Bars
23Bottom To Top Counts of 2-4 Bars
24Price Bar Count Tool
- This tool calculates price ranges from one point
to another in a drop and drag format. - Gann felt many markets price swings tend to run a
similar number of points over periods of time. - He also felt All price swings should be noted and
written down for future reference.
25DIS Monthly Price Swing of 14-16 Points
26IBM Weekly Price Swing of 12-14 Points
27AB Price and Time Division Tool
- According to Gann and Elliot most markets tend to
have retracement and expansion zones that equate
to percentages of high to low or low to high
price/time ranges. - This tool is used to calculate user defined
percentages in a click and drag format for both
types of research.
28AB Range Tool for Price
29Multiple AB Price Range Set at Different Colors.
30 Doubled AB Range from Top to Bottom Price Swing
31AB Range Time Research
32DIS Weekly AB Time Range with Divisions
33Square Root Angle Tool
- The square root angle tool is based on WD Ganns
spiral 9 chart research. - It was believed by him that if a high or low
price was square rooted then add or subtract from
it a specific series of numbers would call many
price projections. - This tool does just this. it takes a user
defined price by clicking directly on the chart,
square roots the price then adds or subtracts a
user defined sequence from it. - Once done it will then draw a line directly
through the price projection drawing a unique
angle. The price line can also be extended a user
defined number of boxes into the future.
34Square of 9 Angle Tool Starting from a Low
35Square of 9 Angle Tool Starting from Low Picture
2
36Square of 9 Angle Tool Set from Different Low
37Angles Extended into the Future
38User Defined Angle Tool
- The user defined angle tool allows the user to
measure all angles from all tops, bottoms and
zero. - This feature will also help research not just
Ganns stationary angles of 45, 63 ¾, 71 ¼ , 82 ½
and others but will also help find many non Gann
angles as well. - This unique angle tool has 3 settings
- Normal
- Extended
- And user defined
39Gann Angles Started from Bottoms and Zero
40Non Gann Angles Starting from Tops to Bottoms
41Hot 68 Degree Non Gann Angles from Bottoms to
Tops
42Several Gann Angles from Tops and Bottoms
43Cycle Research Tool
- This tool start at any date in the past and on
any chart type such as daily, weekly, or monthly
and starts a cycle count from that date and
continues into the future. - Its primarily function is to be used to locate
cycles of similar lengths by highlighting future
time bars with a color of the users choice. - The cycle length can also be any number the user
chooses. - However, since I found cycles DO NOT work in
exact periods such as an 8 week, a 23 week or an
exact 11 month trend change cycle I have added a
unique variance setting within its functions. - This setting allows the user to find a much more
accurate cycle length by highlighting a /- time
bar variance.
44Dow Weekly Cycle of 15 Starting in Oct 2007 with
Variance of /-1
45Dow Weekly Cycle of 22 Starting at 10/1980 and
3/2002
46Dow Weekly Cycle of 22 Starting at 10/1980 and
3/2002
47Numerical Squares Overlay Tool
- This tool takes Ganns numerical square research
to a whole new level ! - Used as an overlay from tops and bottoms, this
tool highlights the price and time periods which
balance with the natural numerical squares as
explained by Gann and Carl Futia in their unique
research. - Along with whole squares such as 4, 9, 16, 25 and
the rest, it will also show the half and quarter
square support and resistance levels in both
price and time. - Both at the same time or separately.
48 Monthly Chart using Whole Squares for Price and
Time
49 Monthly Chart using Whole Squares and Half
Squares for Price and Time
50 Weekly Chart using Full and Half Squares for
Price and Time
51 Weekly Chart using Full, Half, and Quarter
Squares for Price and Time
52Numerical Squares Highlighting only Full and Half
Squares for Time
53Numerical Square Overlay Highlighting only Full
and Half Squares for Price
54Ganns Monthly Cycle Tool
- This tool was built based on Ganns Yearly master
cycles mentioned within his various books and
courses. - The function of this tool is to help expedite the
yearly and monthly trend change cycles faster and
easier then ever before. - It does this by allowing the user to highlight a
markets trend change months that occur in
sequential order going back 30, 20, 15, 14, 10,
7, 5, 3 and 1 years in time only once. - After its initial setup the user can research any
year he or she wants, both forward and even
backwards in time. (As long as enough Monthly
data is given)
55Ganns Master Time Cycles for the Dow in 2007
We see Jan, March, July/Aug, Oct Dec to be
Important Months
56Dow Weekly Swings from Master Cycle Months
57End Of Basic Version Features