CPS Ceramics

1
CPS Ceramics

• Leading the insulation industry into the future
• Earl Snyder Jim Chapin

2
Benefits

• Our product is applied directly against the
  substrate, thus preventing corrosion under
  insulation.
• By accomplishing No. 1, it prevents the
  degradation of efficacy that occurs when water
  gets under insulation.
• Passes the UT test, allowing the inspector to
  gauge the integrity of the steel without ripping
  off insulation.
• Is easier to apply and generally costs less than
  conventional insulation.
• It will not blow off in the wind.
• It can be used to keep things warm or cool and to
  reduce hot lines of up to 500 F to 140 F, OSHAs
  standard.
• It can dramatically reduce power consumption by
  reflecting 99 of solar gain.

3
Most Advanced Product

• The formula for our ceramic insulation was
  developed after extensive research. One of its
  unique characteristics is its ability to
  withstand operating temperatures up to 500 F (260
  C). This makes it the most advanced product of
  its type.

4
Safety/Personnel Protection

• Up to 500 F, down to 140 F, OSHAs standard.
• Passes ASTM 1057 Skin Touch test.

5
Insulation for Oil Storage Tanks

• Kinder Morgan, Richmond, CA terminal

6
Oil Tank Roofs and Walls
7
Keeping Buildings Cool

• The highest reflectance (83) and emissivity
  (94) of any product on the market.
• Cut air conditioning costs dramatically.
• Reduce contraction and expansion of roof, cutting
  maintenance costs.
• Eliminate corrosion.
• Only 1/10th of a pound per square foot.

8
Tanker Cars

• Conventional tanker cars are
• insulated with four inches of
• fiberglass insulation with
• an exterior steel jacket.
• Conventional tanker cars weigh
• 8700 pounds more than ones
• insulated with our product.
• Conventional tanker cars have
• problems with corrosion under
• the insulation.
• Conventional tanker cars have an internal smaller
  tank surrounded with an exterior larger barrel
  which causes a loss of capacity.

9
Condensation

• Condensation can be reduced or eliminated on the
  outside of cold pipes.

10
Acoustical Benefits

• By using 30 to 40 mils (7.5 mm to 1.0 mm) of our
  product on the interior of a building or on the
  housing of equipment that is generating noise,
  acoustical benefits will be noticeable.

11
Masonry

• Because of its excellent adhesion to most
  surfaces, our product has been used in brick
  buildings and rooftops all over the world. Shown
  here, a military hospital that has coated
  surfaces exposed to direct sunlight, thereby
  reducing their air conditioning costs and
  lowering heat absorption in the building.

12
Cost Savings

• It goes on much more quickly than conventional
  insulation resulting in significantly lower
  costs.
• It can be applied directly to the hot surface
  without having to shut down operations.
• It lasts longer than conventional insulation.
• Unlike conventional insulation, it can easily be
  applied to all fittings, pipe bends, pipe
  connections, etc.
• It can easily be re-applied in situations where
  it has been removed for general maintenance.
• It is not impacted by moisture, thus does not
  require replacement after getting wet.

13
Energy Consumption Savings

• Reflection of 99 of solar gain allows consumers
  to dramatically reduce costs with high ROI.
• States like CA, which is currently experiencing
  rolling black-outs, should require that public
  utilities introduce this product to their
  industrial customers.

14
Contact Us

• CPS Ceramics
• Jim Chapin
• 12435 Little Deer Creek Lane
• Nevada City, CA 95959
• [phone] (Office)
• [phone] (Cell)
• jimchapin2002_at_yahoo.com